How to make mezzano do it yourself in the corridor between the kitchen and the hallway

No new houses with more modern and comfortable planners are built not enough. However, in the typical "Soviet" apartments with a characteristic narrow corridor, a huge part of the population both Russia and the CIS countries continues to live on the door and the mellip. Someone decides to get rid of him when repairing, and someone is interested in how to make mezzano in the kitchen more aesthetic and modern. Each solution has its own reason.

A little about the approach to repair and ordering furniture

From a comfortable and roomy cabinet over the kitchen door to refuse stupid. Therefore, few people demolish it - most often, during the repair of the owners, the question is interested in how to make meresol with their own hands in the corridor re-update the design itself and external design.

Personally, I am somewhat skeptical about the towns and hotbeds with all sorts of bridges and nicknames in attempts to make mezzano in the kitchen with minimal efforts. What is just not inventy - crossed old plywood structures with a fatty layer of paint, glue the decorative film and even the linen just to somehow reflect the type of morally obsolete furniture. All this is useless. As they say, the horse died, tear off her. If you do something. Having endured the old and make a normal, new mezzan.

There are two ways:

  1. Collect a box of plasterboard. From the "furniture" materials (LDSP, plywood, array or MDF), only the facade part will be performed.
  2. Collect the cabinet box and the facades completely from LDSP or plywood. Andresol itself will be "suspended" on the backups, narrow long straps. And slightly moves to the top jamb door, as if "standing" on it.

Consider both options.

How to make mezzano plasterboard

If, after repair, pieces of metal profile remained and a small residue of drywall - it can also be put into dealing. It is enough to collect a frame for fastening the bottom and make peculiar mortgages under the fastening of the facade.

Make meresol with your own hands above the door of plasterboard

Be careful - in the adjacent wall, as a rule, wiring passes. Not excess will be "ringing" in the expected places of drilling with a special tool in order not to hurt the wires.

make meresol with your own hands over the drywall door step by step

The collected frame can be seen not only with plasterboard, but also any light sheet material. For example, fine plywood or thick fiberboard.

Make meresol with your own hands above the door of plasterboard

After the frames of the frame of the mezzanine, wallpaper, it will only have to make the facade part. There are two opening options - folding top or swinging to the sides. The facades are selected in the overall style of the kitchen, the easiest way to order them from the same material as the doors. For example, MDF or acrylic.

make mezzano do it yourself above the door in the kitchen

In any case, it will be necessary to lay a narrow bar to which furniture loops will be attached for false panels. In the first case, the bar will have one and vertical, in the second - two horizontal on both sides of the mezzanine.

how to make mezzano do it yourself above the door in the kitchen

How to make mezzano from chipboard or plywood

There are two options here. Make mezzano in the kitchen by analogy with the previous way. I.e:

  • Secure the bottom with metal corners or bars to which it will depart.
  • Collect Opella under the fastening of the front part, as under the built-in wardrobe.

Make meresol himself

By the way, the facades can be made not swing, but sliding, but access will already be exactly twice, on the width of the door of the door. Therefore, if the mezzanine in the kitchen above the door in the corridor is planned to be used for storage of large-sized things, it is better to refuse this idea.

make doors to mezzani do it yourself

As a bottom, you need to use Faneru, an array or lobby type of lining - any fibrous material. The chipboard is too fragile, the chips do not give the desired elasticity and the bottom without additional stiffness will simply disappear and breaks under its own weight.

The second option is to assemble a full-fledged locker, with its own walls (you can no roof), raise and plug it on special mortgages in the form of a bar or metal corner.

make meresol in the apartment

Such a cabinet will be "standing" on the side of the rests on both sides and on the door jacket - on the third party. Make Mezol in the apartment can be through the cuisine and from the hallway, if necessary.

make mezzano in the apartment from the hallway

The design will look like this.

Construction of the case of a cabinet above the door

The main thing is to make a niche correctly from all sides. The bottom of the locker mezzanine into the corridor over the door is made more lateral walls. That is, the side walls are a bit (for a couple of centimeters) shifted to the center. This backlash will help more tightly "get up" the mezzanine with converging or diverging walls. After all, you can always write the bottom at the place - and the side walls will not interfere with this.

Another nuance. If you do the mezzanine to the hallway / kitchen from the chipboard, then it is necessary to put the rigid rib, which would increase the bottom. But it is better how I have already written above, choose a fane or an array.

Which of the ways it is better to choose to make meresol with your own hands - it is impossible to say unequivocally. It all depends on your skills and ideas, as the end result should look like.

How to make meresol do it yourself?

The hallway in the apartments of the Soviet buildings rarely could boast a big hid. And the number of cabinets on this close territory was small - we do not particularly fit. Because helped out mezzanine , low-quality structures, the capacity of which is not overestimated today. It is gratifying that the mezzanine is relatively easy to do independently.

Choosing materials

Andresol - Comfortable, compact look, utilitarian box. And it is made from different materials. Usually use MDF and chipboard due to the availability and low cost of these materials. If there is an opportunity, an array of wood is used, which in its quality wins in two above options. Plasterboard is also used, but by and large for the exterior decoration. From the wallboard often make the case of a box-mezzanine.

Consider the materials that are most commonly used for the manufacture of an antlesol box.

  • Chipboard . Good selection of material in size and thickness, available cost, sufficient selection of shades of laminated chipboard. This means that the material is not so difficult to pick up so that it is combined with furniture in the hallway. Of the minuses - resin as part of the chipboard, which at first can exude not the most pleasant smell. It is worth remembering that the material is afraid of moisture and the risk of chips increases with its independent pickle.
  • MDF. . It is used inside and outside the box, in terms of color gamut and in size, the choice is great, resistant to moisture. Resins at the time of making MDF do not apply. There will be no unpleasant smell. The material will be high strength, it is resistant to mechanical damage. You can count on a long service life. But the price of such a product is higher than that of the chipboard, it is heavier, the cut will have to be ordered in production, because it is independently without special equipment, it is difficult to cope.
  • Array . This is the vehicle, natural, well-leaning and processing. You can count on its long-term service. But it is expensive, the high humidity suffers not in the best way. Alloy dry air will cause cracks. At temperature jumps may be deformed.
  • Plasterboard . It is relatively cheap, to moisture and thermal machines tolerate, in manipulations and installation is convenient. Light material, but fragile, it is necessary to work with it. It is not suitable for the base, used exclusively for the external finish. We will need to do lags that will be supported and the base of the sub-combine box.

Choosing the material, you need to immediately think about what the external decoration of the box will be. It must be harmonized with the interior of the room.

Tools and components

Initially, the design must be thought out, calculate its size, the number of required material. The best solution will make the drawing of the box. It is necessary to make sure that the walls that will keep the box are really durable and will cope with the new load.

From the tools will use:

  • level;
  • roulette;
  • screwdriver, and better - screwdriver;
  • Perforator;
  • Lobzik;
  • aluminum profile;
  • wooden bar;
  • Dowels, selflessness;
  • pencil;
  • necessary accessories, loops or guides;
  • Perhaps the Antezzarous Bracket "Click-Klyak" will be used.

To this list should be added those subjects and means to help decorate the mezzanine.

Manufacturing technology

First you need To determine the place where in the hallway (or at another point of the apartment) passes the wiring. If you lose this moment, you can hurt the cable during the installation process, which will be wrapped by unpleasant consequences. It will help to find an wiring indicator screwdriver or a special seeker, which is sold in any major constructionarket.

Marking and fastening support

  1. Using the roulette and the construction level, you need to draw the line on the wall in the hallway, which will become a guide. On it will be mounted basic attachments for the end oflesol.
  2. In the role of attachments you can use or a wooden bar, or a metal corner. In the fastener, you need to drill a hole for the self-tapping screw, using step 15-20 cm. The part is applied to the line displayed on the wall, marked through the created holes in the fixation sites in the wall.
  3. Now you have to take a drill in the hands and do in the wall of the hole, put a dowel there with self-drawing, fix the guides to the wall. The same actions are made according to symmetry on the wall parallel, as well as above the door itself.
  4. If the box is decided to make it so that it will be chipped by plasterboard, lags are made from the aluminum profile. And then the finished frame can immediately be fixed, to graze drywall plates or any other identical material, plywood or DVP, and sometimes even with plastic panels.
  5. When the support is made, the construction is increasingly similar to a small box or a closet. Actually, it will be a small built-in closet under the ceiling. These are made not only in the hallways and corridors, but also, for example, in the toilet.

Installation of the base

From the sheet of the material from which it was decided to make the basis, the jigsaw should cut the bottom of the future mezzanine . If a chipboard is such a material, you can find the slate of the desired size in the constructionarket. Moreover, you can choose that sample that is separated by the edge, which will save from the need to decorate this edge. If the slab is decided to write, then you will have to purchase and edge-tape.

The bottom is set to the designated place, fixes on wooden rails or corners with self-drawing. If the edge of the product is oponne (that is, the edges are not), the bottom, fixed to the guides, should be moved forward, a couple of millimeters. This will simplify the edge decoration. And the edge-ribbon glue is glued, forming a neat end. This item of creating antlesole in the step-by-step instruction is one of the simplest.

Build door box

Now We make side racks and top boxes . There will soon be placed doors.

  1. Mark the desired height from the directors from the bottom to the place that will be the top of the mezzanine (or immediately to the ceiling).
  2. Just as happened to the bottom racks, the side racks will fasten to the walls. Only in the role of material already wooden bars are used.
  3. Complete installation box top plank. It is attached to the side stops.

Holding door shifts

When the mezzanine is ready for the box, and the basis, its installation is nearing completion, Need to be determined with the doors. And there are several perspectives. Doors can be done Swing, sliding, with lifting mechanisms . Can be done depending on this, for example, Andresol-coupe that today is relevant. In particular, if the hallway is the cabinet of the same type.

The canvas, which will become the door, can be found on furniture manufacturing. You can buy it in a constructionarket, and the choice in this sense is great today. But if none of the typical blanks approached, the options still have.

  1. The DSP leaf can be opened on its own dimensions, placing its ends later with the edge ribbon.
  2. If the tape takes the laminated, with the stove it connects using the usual iron. It is easy to do, because on the involve the edge ribbon - thermoclay.
  3. When the doors are ready, it is necessary to find out what specifically loops to hurt them, because the choice of door loops is huge. Card - option is comfortable for beginner masters, they will get to hang without any problems.
  4. No need to do drank, which you have to provide in the case of overhead loops. The facade is very easy to mount on card loops: it is done with the help of self-tapping and screwdriver.

If it is the door, opens up, then better antleesol loops do not come up with . They are also fixed by self-drawing, but they have a spring inside the design that holds the door and in the open position. And there is also an option of a folding door that comfortably opens the sash up. The gas elevator is immediately installed, that is, a system that will allow the doors to easily open / close. And in the open position, they will be securely fixed.

Consider stands and sliding design, but to call it the most convenient option will be incorrect. Access to what lies in the mezzanine, will be limited to one of the flaps. To establish such a mechanism, you need to secure special rails / rollers. Double-sided mezzanine is mounted as well, except that the doorway in the kitchen will not be laid with bricks or a raisedpanel (if the repair is required). When the add-in will be mounted in the corridor, then from the side of the kitchen, the doors will make a long mezzanine bilateral.

It makes sense to mark this option as curtains.

Recently, he seemed primitive and approached not every interior. Today, when a lot of apartments acquire the features of ecosil, as well as eco-boho, Shutters instead of docts will look in such an interior organically . They are easy to care and can be changed seasonally or in the context of the holidays.

Decorating Tips

Options, how to arrange the doors beautifully, too, a lot. For example, they can Cut out artificial leather . Then such annezol will be organically looked together with the entrance door or furniture design in the hallway. You can even try and create The effect of a carriage screed, Using the stapler from the outside. Clips in that case decorated with butchers, which are pre-tightened by leatherette. In some variations, plastic rhinestones are used instead of buttons.

Another cool idea - Glue the mirror canvas on the doors. It is very convenient to do this with a self-adhesive mirror tile. What is good, so that the space of the corridor will visually seem more and higher.

Among other common and inexpensive options - Fucking doors wallpaper . So the mezzanine can merge with the general design of space. Sometimes the wallpaper is covered with varnish, but often there is simply no need. Particularly enthusiated decoration lovers even glue the doors with wallpaper from the inside. And if the hallway is a wardrobe or dresser, its inner walls can also be saved by the same wallpaper as the "insides" of the box under the ceiling.

Wooden doors can be covered with varnish or mourn. If the doors are made of louvre wooden blanks, they can be painted. A wonderful solution will work out for those who are not only the mezzanine makes it in their own hands.

If it is from boards, furniture shields and other blanks makes a bench or a wooden sofa, then the same material can be used for doors. Then in the space will appear a pleasant eye design roll call.

In a close hallway, you can store a lot of necessary things if it is competent to design the mezzanine under the ceiling . And even a novice master will cope with it, because both the design options, and materials, and fittings, and the design scenarios a lot, and all of them are relatively available even newcomer.

Good luck!

In the next video you will learn how to make meresol with your own hands.

Main types of antlesole

Before proceeding with the manufacture of a multifunctional design, it is necessary to decide with the type of the mezzanine that suits you. Depending on the purpose and device distinguish the following types of products:

  1. Stationary mezzanine. Fastened directly on the wall.
  2. Furniture mezzanine. Placed on the top tier of the cabinets.

Your choice will depend on the room in which you plan to install the design. The thing is that Mezol is placed on a decent height above his head. It is very important to pay enough attention to its consolidation to maximize the accommodation of the apartment. Never use a console arrangement for the shelf, in which the mount is performed only on one side.

In order to maximize the free space in a small room in a room, install a simple corner mezzanine. The product can be fixed on the closet or stationary.

It is best to place the mezzanine in a small corridor or another room with a small width. The design in this case is attached directly to the other opposite walls, its weight is distributed evenly. An additional decor is needed only for the front and bottom plane of the shelf.

Features

Compared with standard furniture designs, Andresol is often used as an additional storage location of various accessories. Rarely these items are used as the main components of the interior, but the exception in this case is the corridor.

Andresoli in this room are used For storage of non-season shoes and clothing. Often attachments are used for other purposes. For example, mezzanine can be used as storeroom and placed directly under the ceiling. Especially often this option can be found in small apartments where there is no additional place to store objects.

Often such spacious and at the same time compact lockers are used in the bathroom and even on the balcony. But still, in the corridors, these designs look more harmonious. They are advantageously complemented by the interior, and at the same time provide an additional place to store clothes or other items.

A little about the approach to repair and ordering furniture

From a comfortable and roomy cabinet over the kitchen door to refuse stupid. Therefore, few people demolish it - most often, during the repair of the owners, the question is interested in how to make meresol with their own hands in the corridor re-update the design itself and external design.

Personally, I am somewhat skeptical about the towns and hotbeds with all sorts of bridges and nicknames in attempts to make mezzano in the kitchen with minimal efforts. What is just not inventy - crossed old plywood structures with a fatty layer of paint, glue the decorative film and even the linen just to somehow reflect the type of morally obsolete furniture. All this is useless. As they say, the horse died, tear off her. If you do something. Having endured the old and make a normal, new mezzan.

There are two ways:

  1. Collect a box of plasterboard. From the "furniture" materials (LDSP, plywood, array or MDF), only the facade part will be performed.
  2. Collect the cabinet box and the facades completely from LDSP or plywood. Andresol itself will be "suspended" on the backups, narrow long straps. And slightly moves to the top jamb door, as if "standing" on it.

Consider both options.

Choosing materials

Andresol - Comfortable, compact look, utilitarian box. And it is made from different materials. Usually use MDF and chipboard due to the availability and low cost of these materials. If there is an opportunity, an array of wood is used, which in its quality wins in two above options. Plasterboard is also used, but by and large for the exterior decoration. From the wallboard often make the case of a box-mezzanine.

Consider the materials that are most commonly used for the manufacture of an antlesol box.

  • Chipboard . Good selection of material in size and thickness, available cost, sufficient selection of shades of laminated chipboard. This means that the material is not so difficult to pick up so that it is combined with furniture in the hallway. Of the minuses - resin as part of the chipboard, which at first can exude not the most pleasant smell. It is worth remembering that the material is afraid of moisture and the risk of chips increases with its independent pickle.

  • MDF. . It is used inside and outside the box, in terms of color gamut and in size, the choice is great, resistant to moisture. Resins at the time of making MDF do not apply. There will be no unpleasant smell. The material will be high strength, it is resistant to mechanical damage. You can count on a long service life. But the price of such a product is higher than that of the chipboard, it is heavier, the cut will have to be ordered in production, because it is independently without special equipment, it is difficult to cope.

  • Array . This is the vehicle, natural, well-leaning and processing. You can count on its long-term service. But it is expensive, the high humidity suffers not in the best way. Alloy dry air will cause cracks. At temperature jumps may be deformed.

  • Plasterboard . It is relatively cheap, to moisture and thermal machines tolerate, in manipulations and installation is convenient. Light material, but fragile, it is necessary to work with it. It is not suitable for the base, used exclusively for the external finish. We will need to do lags that will be supported and the base of the sub-combine box.

Choosing the material, you need to immediately think about what the external decoration of the box will be. It must be harmonized with the interior of the room.

Tools and components

Initially, the design must be thought out, calculate its size, the number of required material. The best solution will make the drawing of the box. It is necessary to make sure that the walls that will keep the box are really durable and will cope with the new load.

From the tools will use:

  • level;
  • roulette;
  • screwdriver, and better - screwdriver;
  • Perforator;
  • Lobzik;
  • aluminum profile;
  • wooden bar;
  • Dowels, selflessness;
  • pencil;
  • necessary accessories, loops or guides;
  • Perhaps the Antezzarous Bracket "Click-Klyak" will be used.

To this list should be added those subjects and means to help decorate the mezzanine.

How to make mezzano plasterboard

If, after repair, pieces of metal profile remained and a small residue of drywall - it can also be put into dealing. It is enough to collect a frame for fastening the bottom and make peculiar mortgages under the fastening of the facade.

Make meresol with your own hands above the door of plasterboard

Be careful - in the adjacent wall, as a rule, wiring passes. Not excess will be "ringing" in the expected places of drilling with a special tool in order not to hurt the wires.

make meresol with your own hands over the drywall door step by step

The collected frame can be seen not only with plasterboard, but also any light sheet material. For example, fine plywood or thick fiberboard.

Make meresol with your own hands above the door of plasterboard

After the frames of the frame of the mezzanine, wallpaper, it will only have to make the facade part. There are two opening options - folding top or swinging to the sides. The facades are selected in the overall style of the kitchen, the easiest way to order them from the same material as the doors. For example, MDF or acrylic.

make mezzano do it yourself above the door in the kitchen

In any case, it will be necessary to lay a narrow bar to which furniture loops will be attached for false panels. In the first case, the bar will have one and vertical, in the second - two horizontal on both sides of the mezzanine.

how to make mezzano do it yourself above the door in the kitchen

How to make mezzano from chipboard or plywood

There are two options here. Make mezzano in the kitchen by analogy with the previous way. I.e:

  • Secure the bottom with metal corners or bars to which it will depart.
  • Collect Opella under the fastening of the front part, as under the built-in wardrobe.

Make meresol himself

By the way, the facades can be made not swing, but sliding, but access will already be exactly twice, on the width of the door of the door. Therefore, if the mezzanine in the kitchen above the door in the corridor is planned to be used for storage of large-sized things, it is better to refuse this idea.

make doors to mezzani do it yourself

As a bottom, you need to use Faneru, an array or lobby type of lining - any fibrous material. The chipboard is too fragile, the chips do not give the desired elasticity and the bottom without additional stiffness will simply disappear and breaks under its own weight.

The second option is to assemble a full-fledged locker, with its own walls (you can no roof), raise and plug it on special mortgages in the form of a bar or metal corner.

make meresol in the apartment

Such a cabinet will be "standing" on the side of the rests on both sides and on the door jacket - on the third party. Make Mezol in the apartment can be through the cuisine and from the hallway, if necessary.

make mezzano in the apartment from the hallway

The design will look like this.

Construction of the case of a cabinet above the door

The main thing is to make a niche correctly from all sides. The bottom of the locker mezzanine into the corridor over the door is made more lateral walls. That is, the side walls are a bit (for a couple of centimeters) shifted to the center. This backlash will help more tightly "get up" the mezzanine with converging or diverging walls. After all, you can always write the bottom at the place - and the side walls will not interfere with this.

Another nuance. If you do the mezzanine to the hallway / kitchen from the chipboard, then it is necessary to put the rigid rib, which would increase the bottom. But it is better how I have already written above, choose a fane or an array.

Which of the ways it is better to choose to make meresol with your own hands - it is impossible to say unequivocally. It all depends on your skills and ideas, as the end result should look like.

Perfect place for shelves

Often Andresol is placed right above the entrance door, if enough space. It will profitably decorate the entrance to the dwelling. The design can be installed in a long and narrow corridor.

Above the entrance and in the corridor

Andresol over the entranceAndresol over the entrance to the hallway.

Between rooms

Bilateral structures are installed through the door. Two access points from different premises are obtained. At the same time, the appearance of the rooms should not be cleaned. For example, if the door leads from the corridor to the living room, the regiment should be combined with the interior of the room in it.

Andresol between roomsAndresol between rooms.

Setting the gallery

If there is a niche or just a lot of space in the hallway, the installation of the gallery mezzanine is suitable. It will take the entire space from the ceiling to the floor, from the wall to the wall, throughout the perimeter. And there will be different functions: both shelves for accessories, and a closet for clothes, and footwear stands.

Gallery Andresol in the hallwayGallery mezzano in the hallway.

At the hallway with meresers there may be other functions, in addition to the savings of the economic utensils. On the shelves you can arrange a library if there are many books in the house.

What anessol looks like in different styles of the corridor and hallway

If the enezol is not part of the furniture headset, it is important that she harmonized with it. Sometimes when updating the furnishings, it is worth thinking about changing the facade for the shelter under the ceiling. There are many examples when the style contradictions spoiled all the impressions of the situation. So the oak facade will be completely inappropriate in a minimalist interior, and the shelves with curtains will never find their place in the classics.

Antlesoli in the corridor options in the interiorThe standard and most common view is the attached model, located under the ceiling.

Modern

The basic condition of style is harmony, everything must be performed in one way. Consequently, the design of the mezzanine depends largely on the type and color of furniture, finishes. The materials used does not limit the materials. Sliding doors of the mezzanine can be decorated with stained glass, if at the same time they will complement the rest of the situation. They can even be decorated with wrought elements if there is a staircase with such railing. The main material of the finish remains the facades of MDF.

Andresoli in the corridorThanks to the appropriate finish, such structures fit well into the interior.

Classic

Increasingly, a luxurious and elegant classic is found in ordinary hallways of medium and large size. The basis of the composition is the overall furniture with quilted leather inserts and mirrors with facet. Even if the enezol over the door in the corridor is not part of the headset, it is interesting to beat it is not difficult.

Mounting mezzanine with her hands on a metal profileCabinet structures are attached directly to the furniture. Usually, these mezzanine is located on the upper tiers of cabinets.

The material for the facade can be a natural tree or MDF with a good texture. The doors decorated with leather inserts originally, which mimic the carriage tie. On the perimeter, the niche can be allocated to the stucco, up to to create a support for the shelf on the walls in the form of a semi-column. The bottom of the shelf can be decorated with acrylic mirror plastic, rhombuses.

антресоли варианты в интерьере коридораThe size of the internal space of such a design will depend on the height of the cabinet and the free space between the top tier and the ceiling of the room.

Tip! When adjusting deep niches, it is worth thinking about additional lighting. The optimal option will be the ceiling LED lamp for the cabinet.

Minimalism

In the hallway, where there is nothing superfluous, the pectoral design should not attract attention. Doors make MDF with plastic coating. They close the entire niche skill. The fittings are used without a handle, opens up when pressed. Relevant will also be facades from toned plexiglas.

Andresoli in the corridorThe advantage of mounted cabinets is that they do not take free space on the floor.

Contemporary

This style has long fallen at home and won the heart, but many mistakenly continue to call him modern. The word "contemporary" means "modern". The property is created in the interior with the help of inexpensive items, smooth surfaces and a minimum of decor. Andresol in the corridor of contemporaries under the ceiling should be a little care. Doors of laminated chipboard or MDF with plastic coating are suitable.

Andresoli in the corridorChoosing a suitable furniture, be sure to take into account the design features.

Country

The unique rustic style prevails simplicity and naturalness. Here it is enough to be a plaid curtain or a painted swollen door with a round wooden handle. Niche can stay open to storing small things in wicker baskets.

антресоли в интерьере коридораMost often, the hallway is chosen to accommodate attachments.

Provence

Natural materials and pastel colors prevail. It is allowed to stain with bright paint of any surface, including wooden furniture. Facades can be solid or in the form of a door with wooden blinds. It is appropriate to use registration by decoupage.

Andresoli in the corridorAnother suitable place to accommodate the mezzanine is a long corridor.

How beautiful to arrange meresol and reorganize it

Andresol will look harmoniously, only if its design corresponds to the interior. It can be reflected in a shoe shelf or interior door with stained glass window. There are many interesting options for large and small apartments.

Andresoli in the corridor

Hinged structures can be located around the perimeter of the corridor under the ceiling.

Note! Sometimes in the photo you can see that the doors of the cabinet are covered with wallpaper with the goal of masking under the "environment". Those who wish to follow the example should understand that in a short time, the wallpaper around the handles on the doors will begin to get dirty and watched.

How to choose

Previously, there were no such problems. In Soviet times, the apartment was bought with already built-in hinged shelves and cabinets. The new buildings cannot please this, and the tenants need to choose the mezzanine in the hallway. Here are some useful tips:

  1. Selecting the size, consider that the mezzanine should not hang over the door, overlap access to the window or cabinet next;
  2. The material should be so that the walls withstand the weight of the structure;
  3. It is desirable that the inside has a source of lighting; Подсветка для антресоли в прихожейIllumination for the mezzanine in the hallway.
  4. If for the facade to choose a noble tree, and for the rest of the box - plasterboard or chipboard, it turns out not so expensive;
  5. Material must approach other furniture in the interior, including color, tone, texture, texture, decor. Правильный цвет мебели The right color of furniture in the hallway.

The lower part of the design is better to choose a light. This will help visually preserve the space of the hallway. By the same purpose, it is possible to make a bottom reflecting panel with a mirror effect.

Светлая нижняя часть конструкцииLight bottom structure.

Photo of antlesole in the hallway

Sources

  • https://prorab.guru/stroitelstvo/kak-sdelat-mnogofunktsionalnuyu-antresol-svoimi-rukami.html
  • https://dekoriko.ru/prihozhaya/mebel/antresoli/
  • https://sdelay-mebel.ru/kak-sdelat-antresol/
  • https://stroy-podskazka.ru/antresoli/kak-sdelat-svoimi-rukami/
  • https://prihozhaya.guru/interer-koridora/antresol
  • https://proffstroygroup.ru/prihozhaya/antresol-v-koridore.html.
  • https://dizainexpert.ru/prixozhaya/sovremennye-varianty-dizajna-antresolej-v-koridore/
  • https://infopotolok.ru/drugoe/antresol-v-prihozhej-pod-potolkom/
  • https://justinterior.ru/antresoli-v-prixozhej/

[Collapse]

How to make meresol in the corridor with your own hands?

How to make meresol in the corridor with your own hands?

Now at home is built with comfortable conditions not only for finding people there, but also for storing things. But for those who still live in the apartments of an old sample, the question remains up to you how to make mezzano in the corridor with your own hands so that it looks aesthetic and modern. Tell about it in publication.

First of all, it will take a drill or a perforator for the construction of a hinged locker in the form of annezol in order to drill holes in the wall. During the drilling, a vacuum cleaner will be useful for you: ask someone to have a vacuum cleaner under the place where you break through the wall - so smaller dust turns on the floor.

It will take another special tool for "transk" wiring.

Over the doors, as a rule, electric wires pass, and in order not to hurt them and not stay without light when drilling holes, in the alleged places it is better to first walk with a metal detector or a special device for "transk" electrical wiring.

If there are no devices at hand, pay attention to the location of the switches, since the wires are accurately up. But it is still more reliable to check its presence in the wall with special services.

But directly the tools that will be needed for the manufacture of the location itself:

  • self-tapping screw;
  • Construction level to check the surface levels and all fixing parties;
  • Pencil for tags;
  • stapler;
  • screwdriver;
  • Tool for trimming drywall and plywood.

It will also takes furniture material, metal profile and fittings. We will tell how to make mezzano, using plasterboard and paneur.

Manufacture of plasterboard

In order to assemble the mezzanine in the hallway under the ceiling, except the drywall will need a metal profile. If you just did the repair in the apartment, then you probably have such residues and drywall, and you have left metal products - that's how to use them in this case by appointment.

From the metal profile, the framework of the future design is assembled for fastening to the wall, then fasten the bottom (from drywall) and the facade (choose the material and color under the furniture existing in the corridor). Door make either folding upstairs, or so that it opens in a comfortable side.

Sometimes for convenience in the mezzanine make two doors, which are opening in different directions. In any of these cases, you will need a narrow plank for fixing furniture loops for the door.

Depending on the opening method, it will be located either vertically or horizontally.

That is, in this case, it's very simple: only the framework is made to fix the facade and the bottom: there are two walls and a roof. Gypsum Carton can then be painted under the appropriate tone of the hallway or punctured self-taking under the color of all furniture.

You can completely simplify the task and not even pumped out the facade part, but to make only the bottom. Instead of doors to close the curtain from textiles. However, this will already be similar to the mezzanine, but more on a part of the niche. For things, especially those that require long-term storage, it is better to build something in the form of a locker with the door.

How to make mezzano from plywood?

It is possible to make it easier for me with your own hands in the corridor over the door, applying as the basis of Phaneur. Consider examples of two options when this material is applied. .

  • The first way is similar to what is described above . With the help of metal corners or bars, the bottom is fixed. Then collect formwork for the facade (by analogy with the wardrobe in the embedded version). The facades in this case are made both swing and sliding - it depends on what you plan to store there. Under large-sized things are better sliding door opening. By the way, the Phaneur for the bottom can be replaced by a trampling or an array, but not a chipboard is a very fragile material, the chips will not stand the big weight.
  • The second method is to collect a full-fledged locker (from plywood) of the corresponding dimensions. This design will have their own walls, the roof (if it is planned directly under the ceiling, then you can save on the roof). The cabinet is rushing on special planks made from bars or on a metal corner fixture. The design as a whole will be held not only on side supports, but also on the door jamb. Scheduled with the doors based on the convenience.

The main thing in this work is to correctly remove the dimensions (all parties and bottom). The bottom of such a locker usually makes a few centimeters more walls on the sides - such a reception contributes to the best design of the design, and then, when the side walls are slightly shifted to the center, it does not prevent anything prevents the bottom of the bottom.

It is necessary to take into account the next moment: from what you plan to store in the attachment above the door in the corridor depends enhancing the bottom of the structure.

If we are talking about heavy items, it is better to enhance the bottoms of stiffness ribs, especially if you decide to make a locker from the fiberboard, and even with other materials it does not interfere with additional gain.

Since plywood over time can progress, it is desirable to immediately be brought back to the rigidity rib. It can be ordinary wooden boars or metal rules, clogged cross-closer outside on the bottom. This part can then be masked.

About how to make mezzano in the corridor with your own hands, look next.

How to make a multifunctional mezzanine with your own hands?

Added (a): Natalia Kratajskaya February 18

Andresol is a shelf that is located under the ceiling. This design can be installed in the corridor, kitchen, bathroom or toilet. The main thing - the mezzanine should not visually reduce the height of the ceiling, and should take care so that it harmoniously fit into the interior of the room. Having done it with your own hands, you will save finances, get rid of the problem of climbing the premises of objects that are rarely used in everyday life. To perform work, you will need simple tools and a little time.

Main types of antlesole

Before proceeding with the manufacture of a multifunctional design, it is necessary to decide with the type of the mezzanine that suits you. Depending on the purpose and device distinguish the following types of products:

  1. Stationary mezzanine. Fastened directly on the wall.
  2. Furniture mezzanine. Placed on the top tier of the cabinets.

Your choice will depend on the room in which you plan to install the design. The thing is that Mezol is placed on a decent height above his head. It is very important to pay enough attention to its consolidation to maximize the accommodation of the apartment. Never use a console arrangement for the shelf, in which the mount is performed only on one side.

In order to maximize the free space in a small room in a room, install a simple corner mezzanine. The product can be fixed on the closet or stationary.

It is best to place the mezzanine in a small corridor or another room with a small width. The design in this case is attached directly to the other opposite walls, its weight is distributed evenly. An additional decor is needed only for the front and bottom plane of the shelf.

Examples Installations in the photo

угловые антресоли
Corner furniture enezol in the hallway
мебельные антресоли
Furniture Messol in the bedroom
mezzanine
Stationary mezzanine in the corridor
Примеры установки антресолей
Stationary mezzanine on the door in the corridor

How to place in the apartment?

The suspension cannot be installed in an arbitrary location. For this there are defined rules.

  • Andresol should not block access to the window or door, interfere with the opening.
  • The appearance of the room and its ergonomics should not be disturbed. If you incorrectly hang the shelf, it can make the room too narrow, low or elongated. Be sure to keep the effect of open space.
  • For rooms with high ceilings, you can safely use gallery mezzanine. Such a design ishing the room with three sides and is well suited for home library. However, note that the width of the gallery mezzanine taking into account the bookshelf will be about a meter, while the standard size of the shelf is much smaller.
  • Quite often, the mezzanine is used in bathrooms and kitchens. Before installing the product, make sure that the wall design will withstand such a load.

Perfect place for shelves

Most often, the mezzanine is placed above the entrance door. This space under the ceiling is almost never used. To compactly place rarely used accessories, use a spacious mezzanine in the kitchen. This product will allow freeing more free space, relieve the room from litterness.

The best place to accommodate the mezzanine is a narrow and long corridor, an entrance hall or living room. It should not be afraid that the room will decrease in height, because the shelf will only take a minor part of the wall. Such furniture will help modify the planning, make it more interesting.

We choose the material

At the stage of the choice of building material for the superstructure, several main factors must be taken into account. These include: a stylist solution, your taste preferences, environmental friendliness and practicality. Most often, the mezzanine is made of natural wood, chipboard or drywall.

Compare the advantages and disadvantages of these materials using a table:

Material

Benefits

disadvantages

Wooden array

1. Environmentally friendly material;

2. Durable;

3. Easy to process;

4. With a little damage, you can easily restore the texture.

1. It is expensive;

2. Sensitive to moisture;

3. With sharp temperature drops can be deformed.

Plasterboard

  1. It is inexpensive;
  2. Good sound insulation and energy saving;
  3. Suitable for both rooms with dry air and high humidity;
  4. Plastic;
  5. Has a small weight;
  6. Simple in installation.

1. The material is quite fragile, its transport requires special accuracy;

2. Promotes a minor decrease in the volume of the room;

3. Artificial material.

Chipboard (MDF)

  1. It is inexpensive;
  2. Surface smooth and smooth;
  3. May have a large size;
  4. Suitable for use in rooms with high humidity.
  1. Small chips and damage almost impossible to close;
  2. Over time breaks down and can keep fastening badly;
  3. Artificial material.

Which of these options prefer - to solve you. For example, for the bathroom more suitable mezzanine from chipboard, and for the living room - from a natural tree.

If you wish, you can easily combine artificial and natural material. The tree is very beautiful, but expensive. From it you can make the outer walls and the facade of the superstructure, and for the inner shelves you can safely use chipboard or MDF. If you prefer an open-type enezol, make a section from glass or metal.

The main stages of the establishment of a stationary mezzanine

  1. First of all, prepare the necessary material and decide on the size of the future superstructure.
  2. After that, you can start creating a drawing. Calculate the length and width of furniture shields and distribute them in such a way that you have as little waste as possible. The shelves will be placed inside, and on the sides - metal corners to strengthen the design.
  3. According to the drawing, placing separate parts on the material and cut them with a jigsaw or circular saw.
  4. Each individual element of the facade of the mezzanine is processed by a milling machine. Special attention is paid to the doors.
  5. We make the internal shelves of the product from chipboard or drywall. Their thickness should be sufficient to withstand the weight of the things you plan to put in the mezzanine.
  6. We connect all the details of the design with the help of screws. On the back panel, fix the metal "ears", which are necessary for attaching the mezzanine.

The doors of the product can be sliding or swinging. As decor, use self-keys, veneer, paintwork. If you are not sure of your designer opportunities, you can make mezzano on your own, and in the workshop to order the manufacture of decorative doors, which will harmoniously complement the interior of the room.

Video: Making a stationary mezzanine with their own hands

Fastening options

There are two most common ways of reliable fixing stationary mezzanine:

  1. Using wooden bauses. To do this, you will need lumps with drilled holes every 25 cm. Use the building level to read the perfectly flat line on the wall. We apply wooden elements to it and make a mark in each hole. Using a drill, we make a hole with a depth of 60 mm, and in each insert plastic dowels. After that, you can safely mount the rack with reliable self-drawing. This mounting method is suitable for installing the mezzanine between the two walls.
  2. Use a metal profile. For such works, you will need a ceiling profile of Mon 28x27mm, which you need to fix around the perimeter of the bottom of the product. From PP 60x27 mm do crossmeas. The lower part of such a frame is necessarily squeezed by plasterboard, and on top of it is performed from a durable plywood sheet. The design should be sufficiently rigid to withstand the weight of the mezzanine with things and do not bend.

Take advantage of the advice of professionals to correctly and accurately perform the construction of the structure.

  • The lower part of the shelf must be at an altitude of at least 2 meters. All the space remaining to the ceiling can be taken by things.
  • If you are creating a design over the entrance door, make sure that the bottom is set to the top of the doorway. So the mezzano will look harmonious.
  • Between the top of the product and the ceiling should not be free space. This zone can not be useful for you and will only collect dust.
  • Do not fasten the mezzanine in close proximity to the light source, if you do not want to darken the room.

Making furniture mezzanine

The second type of design is furniture mezzanine. This is a kind of superstructure in the form of a small cabinet.

It is manufactured by the same principle as the stationary product. However, there are some differences:

  1. Furniture mezzanine must immediately repeat the stylistics of the product on which it will be placed.
  2. To make such a design, you need to choose the most suitable material of identical texture and coloring. The type of fittings should also coincide.
  3. If you are using a chipboard to make a furniture mezzanine, give preference to already laminated material. In the extreme case, you can cover it with self-adhesive paper of the same color.
  4. Chipboard sheets are bonded with conventional metal corners.

If you like to experiment with style, you can make your hands the furniture mezzanine in another color. It will help to emphasize your individuality and taste.

Additional fastening of such an antlesoli is not required. It is enough to put a locker to the top of furniture.

Making sliding doors do it yourself

Sliding flaps are very convenient and compact. You can make them alone by using step by step guide:

  1. You will need a plastic profile with grooves. You need to cut it into two parts by the width of the mezzanine.
  2. Using the perforator, fix profiles on the ceiling close to each other.
  3. Doors for design cut out from chipboard with a jigsaw or circular saw. Carefully process each element on the milling machine. Subsequently, they can be decorated at your discretion. Attach the handles for convenience.
  4. Finished elements insert into the grooves of the profile, by contour fastening them with a plastic frame. At the same time, all extraneous parts will be reliably hidden.

Ready! Sliding doors should open with ease. Check if anything bothers them.

Creating open doors

Swing sash is best made from veneered MDF or chipboard. Less frequently for such products is used plastic. Cut the elements of the desired size and process them with a large sandpaper. The front of the door can be decorated at their discretion.

Poid loops are used for fastening the swinging doors. They are first attached to sash, and only after that - to the main part of the mezzanine. So that these products are perfectly smooth, while working, use the construction level, otherwise the result of your efforts can become thinned doors.

From the outside, do not forget to attach the handles. In order for the sash closed as thick as possible, the retainer and magnet can be attached from the inside.

Door options in the photo

раздвижные дверцы для антресоли
Sliding door Furniture mezzanine in the hallway
раздвижные дверцы для антресоли
Sliding doors for furniture antleesol
виды дверей для антресоли
Swing doors from chipboard for stationary mezzanine
виды дверей для антресоли
Washing doors for mezzani

Andresol is a useful and multifunctional element of furniture, which will help free the place in your apartment. Everyone can independently make such a design by attaching a little effort. Before you begin work, be sure to think about the design of the product and select suitable materials for it.

I have been working as a copywriter for several years. I have a higher economic and philological education. Rate article:

(31 Voice, Average: 3.2 out of 5)

Share with friends!

It is important to maximize correctly approach the placement of lamps, various lamps. Most likely they will become the main source of light

The perfect option is to position right in the ceiling modern LED lamps, set a pair of flyers.

Due to the fact that under high ceilings it is preferably quite hot, it is better to immediately take care of the acquisition of a fan or even an auditory window can be made, which will allow air to be freely circulated in space.

Easy way to simultaneously solve both problems - to order the installation of a high-quality split system, in which forced ventilation will be provided. Thanks to modern technologies, the systems do not occupy a lot of space. You can even hide them enough enough in the interior or re-organize.

Deciding with the appointment of the mezzanine, it can make not only a place to relax, work. Choosing the suitable doors for the antleesole, it can be an excellent storage system for various things that will look really stylish. The main thing is to only correctly determine its color decision so that it is combined with other interior items.

If you plan to install the house design, think in advance about where it will be its place and which it will be sizes, as it is not a sofa or table, it will be extremely difficult to remake. Best of all, if on this issue you will consult with an engineer, designer. Thanks to the experience, they will be able to quickly prompt the most profitable interior solution.

Professionals will be able not only to solve difficult questions from the technical side for you, but also to get rid of the chief of choice, headaches. I do not want because of the slightest inaccuracies, Mezol turned out to be unsuitable for use, right? It is better to pay for the services of specialists than then try to correct the consequences.

As a rule, the desired things are removed on the mezzanine, which at the moment or the season will not be useful. They are hidden in this way, they are reliably stored and waiting for the moment when they may need, do not interfere and do not occupy a place in ordinary cabinets.

By the way, the apartments are not completed by conventional cabinets, even the furniture in the form of a "wall" has become more accurate and compact, with less capacity, and there are no small-sized apartments: there are many standard planners where mezzanine and built-in wardrobes are originally provided.

But if in the initial layout, such embedded shelves and cabinets are not provided or were demolished for some reasons, it is easy to build mezzanine with their own hands, armed with simple guidance with step-by-step manufacturers.

Consider the step-by-step instructions of the work performed. First you need to decide on the place where Mezol will be located. Check the walls on the subject of the presence of electrical wiring so that it is accidentally damaged.

Well, if the apartment is not low ceilings and a wide entrance hall or corridor. And even better - when there is an extraction hidden from a general review. But in most cases it is just a wardrobe above the head.

How to make meresol do it yourself? First you need to consider the type of the mezzanine. Most often it is a small wardrobe above the doorway with the doors. Doors can be replaced with a curtain or not close at all.

Next do the measurements of the space, which will occupy the mezzanine, and make purchasing materials:

  • Metal profile around the perimeter of the bottom of the mezzanine and for transverse crossbars that support the bottom (if the enezol is large or long);
  • Sheet of plasterboard or chipboard for the bottom;
  • Wooden bars for cross frame of the mezzanine;
  • Dowel for mounting a metal profile to the wall;
  • self-tapping screws to the wall and among themselves wooden bars;
  • Small metal corners for fastening the end frame from bars;
  • Loops for furniture for mounting the door.

Measure the height of the bottom of the future mezzanine. It is not necessary to do without the help of a level, otherwise everything will be done awry.

The list of functionality features of furniture loops is very large, they can be installed on cabinets made from various materials and different, non-standard design. Conditionally, all furniture loops for cabinets can be divided into the following varieties.

On the position of the door relative to the side wall

Regarding how the facade will close the sidewalls of the cabinet, you can highlight three varieties of furniture loops.

Overhead furniture loops - the door completely closes the end of the sidewall
Deposit (internal) furniture loops - the end of the cabinet case is fully open.
Semi-roll furniture loops - the end of the housing in the place of fastening the canopy is hidden by half the facade.

According to the type of material of the facade and the case

Separately, you can select another type of furniture loops with installation on glass facades and with a metal profile frame.

By Montaja method

There are three types of furniture loops, depending on the design and installation features, followed by adjustment. Differences are visual at the location of the hinges housing with a response.

SLIDE-ON - hinge housing with a slot is entered under the specified response set and fixed in the desired position.
CLIP-ON - the hinge housing is inserted into the groove of the installed response, fixed by pressing, and is adjusted by the fastening screw.
Key-Hole - The housing of the loop with the hole is superimposed on the installed response bar, the translational motion is introduced under it to a fixed position.

On the diameter of the bowl

In the bulk, four-stroke furniture loops have a bowl with a diameter of 35mm. There are so-called "mini-loops", in more compact design, with a diameter of a bowl of 22-25mm.

With different opening angle

A more complex design of the furniture loop housing can provide a greater opening angle, up to 165-170 degrees against standard 90-105 degrees. Such types of furniture loops are called "Transformers".

Also in everyday life you can meet the name "Crocodile", "Crab".

Furniture loops with a closer

More details about furniture loops for cabinets with closers can be read here. The mechanism itself of smooth "reaching" the facade into a closed state can be built into the mechanism or overhead. In the first case, immediately buy furniture loops with a closer, in the second - you can purchase it separately and install on already existing loops (if the manufacturer has provided such an upgrade opportunity).

Furniture loops for corner cabinets

The design of the cabinet box can be angular and end, with various features and non-standard solutions. Furniture loops for corner cabinets allow you to equip the facade with almost any version of the furniture in the increment of the angle of 5 degrees.

In some cases, when designing, the hinge is required to provide special planks to make the angle "correct", approximate to 30, 45, 60, 90 or 170 degrees.

We highlight the main varieties of furniture loops for corner and end cabinets in tabular form, including those used to open the facades fixed to the false panels and between themselves, the "accordion".

Gallery (straight) loop for false panels.
For an angular kitchen cabinet with a facade of 45 degrees.
For a beveled (end) kitchen cabinet with a facade -45 degrees.
For an angular cabinet with a facade under 30 degrees.
For a beveled (end) cabinet with a facade under -30 degrees.
Carousel loop for a M-shaped door of the "Harmoshka" cabinet.

In the width of the locker, cut the plastic profile with the grooves. You will need two such segments. Punching profiles on the ceiling in such a way that they fit tightly to each other. Cut the doors from the chipboard to easily make either a regular jigsaw. Carefully treat the door with a mill. Subsequently, they can be placed by film or plastic slats. For convenience in operation, attach the handle. Ready doors for antlesole insert into the profile grooves. On the contour of the niche make the frame from plastic rails. It will hide from unauthorized eye Bruks and other details. Do not forget to check how easily the doors are moving and does not prevent them from anything. So that is all. Andresol looks like new with a minimum amount of time and minor cost. You can download the locker things.

Andresoli were a common element of the interior in Khrushchev apartments. Despite this, they did not lose their own popularity at all, but only upgraded with time. Therefore, today you can decorate your hallway room not only practical, but also an elegant cabinet-mezzanine.

If you have a lot of things that are no longer in the closet, you can buy from a private wizard or make the Andresol do it yourself. In her, for example, you can fold the winter shoes in the summer season. However, before making the creation of the mezzanine, it is necessary to know what kind of types are.

Types of antlesole:

  1. One-sided;
  2. Bilateral;
  3. Open;
  4. Closed;
  5. Corner.

These are the five main criteria that will help you choose the appearance of the future mezzanine.

The one-sided type of mezzanine implies a model, the doors of which are located only on the one hand, and on the other - a rear board. Two-sided or end-to-end, respectively, does not have such a board, and with its both sides there are doors.

Also there are open and closed types of antlesoli. Closed models - those who have doors, and the openly implied the usual shelf under the ceiling. Plus the last thing is that it's more convenient to get things, but most people prefer to close the mezzanine doors. By the way, Alla-5 is considered one of the most popular models of Antresol, which is made in classical stylistics and fit into any interior.

Corner mezzanine stand just more expensive, and installed in those apartments where the layout does not allow you to set the standard model. Alternatively, the angular mezzanine can also be an element of design that emphasizes the dignity of the room or vice versa, you can decorate any things with it. For example, a ventilation system.

If the enezol is not part of the furniture headset, it is important that she harmonized with it. Sometimes when updating the furnishings, it is worth thinking about changing the facade for a shelf under the ceiling

There are many examples when the style contradictions spoiled all the impressions of the situation. So the oak facade will be completely inappropriate in a minimalist interior, and the shelves with curtains will never find their place in the classics.

The standard and most common view is the attached model, located under the ceiling.

Modern

The basic condition of style is harmony, everything must be performed in one way. Consequently, the design of the mezzanine depends largely on the type and color of furniture, finishes. The materials used does not limit the materials. Sliding doors of the mezzanine can be decorated with stained glass, if at the same time they will complement the rest of the situation. They can even be decorated with wrought elements if there is a staircase with such railing. The main material of the finish remains the facades of MDF.

Thanks to the appropriate finish, such structures fit well into the interior.

Classic

Increasingly, a luxurious and elegant classic is found in ordinary hallways of medium and large size. The basis of the composition is the overall furniture with quilted leather inserts and mirrors with facet. Even if the enezol over the door in the corridor is not part of the headset, it is interesting to beat it is not difficult.

Cabinet structures are attached directly to the furniture. Usually, these mezzanine is located on the upper tiers of cabinets.

The material for the facade can be a natural tree or MDF with a good texture. The doors decorated with leather inserts originally, which mimic the carriage tie. On the perimeter, the niche can be allocated to the stucco, up to to create a support for the shelf on the walls in the form of a semi-column. The bottom of the shelf can be decorated with acrylic mirror plastic, rhombuses.

The size of the internal space of such a design will depend on the height of the cabinet and the free space between the top tier and the ceiling of the room.

Tip! When adjusting deep niches, it is worth thinking about additional lighting. The optimal option will be the ceiling LED lamp for the cabinet.

Minimalism

In the hallway, where there is nothing superfluous, the pectoral design should not attract attention. Doors make from MDF with plastic coating

They close the entire niche skill. The fittings are used without a handle, opens up when pressed. Relevant will also be facades from toned plexiglas.

The advantage of mounted cabinets is that they do not take free space on the floor.

Contemporary

This style has long fallen at home and won the heart, but many mistakenly continue to call him modern. The word "contemporary" means "modern". The property is created in the interior with the help of inexpensive items, smooth surfaces and a minimum of decor. Andresol in the corridor of contemporaries under the ceiling should be a little care. Doors of laminated chipboard or MDF with plastic coating are suitable.

Choosing a suitable furniture, be sure to take into account the design features.

Country

The unique rustic style prevails simplicity and naturalness. Here it is enough to be a plaid curtain or a painted swollen door with a round wooden handle. Niche can stay open to storing small things in wicker baskets.

Most often, the hallway is chosen to accommodate attachments.

Provence

Natural materials and pastel colors prevail. It is allowed to stain with bright paint of any surface, including wooden furniture. Facades can be solid or in the form of a door with wooden blinds. It is appropriate to use registration by decoupage.

Another suitable place to accommodate the mezzanine is a long corridor.

Andresoli - wide upper shelves used as a storeroom in apartments. However, this term also denotes the upper half-itham located in the bulk of the main floor. In the works of French writers of the eighteenth century, mentions are often found that the mezzanine was discharged to accommodate the servants.

Today, the mezzanine has two meanings:

  1. The upper part of the room, which is divided into two small floors.
  2. Shelf, located under the ceiling of the room.

Purpose - for storage of things

Menesoli can be used as a storage chamber. However, before starting it with its installation to place various things, you need to calculate the exact designs. To make mezzano do it yourself, you need to calculate what load will be able to withstand the base.

This will ensure the safety of the use of the cabinet with the mezzanine

It is necessary to pay attention to how the shelf will be closed. Doors for antlesole sold various shapes, so you can choose the option that will approach more than the rest

To make meresol with your own hands, it is important to take care how it will be ventilated, or covered. So that things are ventilated naturally, you can make the holes in the walls of small sizes.

This will allow access for oxygen and will provide its circulation.

Recommendations on the device

The case of the mezzanine must be properly lit. A simple lamp or lamp installed in the room will not be enough to navigate. It is usually installed mezzano in the corridor or a hallway, which is not enough. Experts recommend:

  • Install the plander to protect the light source. This will avoid mechanical damage to the chandelier when placing things;
  • The lamp itself or the lamp is best located closer to the shelf.

Attention! Andresol over the door is a hinged locker. Its main function - filling out free square from the ceiling to opening

Doors for antlesole can be made in the form of a curtain. This method is used infrequently, since such a design will not look aesthetically. This is different if the door of the cabinet and the curtains in the room are made of one material.

Classification of models

As for the placement of the antlesole, they can be of two types (they are made to order):

  1. Rectangular.
  2. Corner.

Depending on the number of doors, two types are allocated (the photo of suitable models can see and choose each):

  1. Unilateral.
  2. Bilateral.

According to experts, bilateral models (they can be seen in the photo) are the most convenient in operation. When the confession is needed to do everything you need so that it looks beautiful and was able to supplement the design of the room. In particular, it applies to rooms with low ceilings

In them, the mezzanine will be lowered low, so they will attract surrounding attention. If you make an order, you must specify the height of the ceilings in the room

Attention! The mezzanine must be located at the installed height, varying from 1.9-2 m from the floor surface, so as not to interfere

Make mezzano alone

How to make mezzan, if you do not want to make an order? To independently make mezzani, you can use the following instructions:

  • Attach the rack on the wall, the thickness of which is 3 × 5 cm.
  • For flooring, you can use different boards installed tightly adjacent.

Paint the flooring advise in dark colors.

The second method of manufacturing the mezzanine is much easier. It will take a plywood stove to work, able to fill the entire area of ​​the opening. To the mezzanine does not move from his place, from the bottom it is recommended to fasten with screws. To give the design more attractive appearance, the recesses are spun.

Tip! To ensure the functionality of the structure, it is recommended to distinguish between the inner area of ​​small partitions. If you make meresoli to order, then mention it.

Owners of their own homes can be said, lucky more than the inhabitants of apartment buildings. In a private house you are free to design your hallway so that it serves only the place where you can remove street clothes and until the next exit from home does not visit it.

But the owners of the apartments, especially the Soviet buildings of the type "Khrushchev", are forced to think over the arrangement of the hallway so that it contains often a large amount of clothes, shoes and many more important things, while remaining the most spacious as possible. With the task of storing a homemade scar, while remaining low and not interfering through the corridor, Andresol copes perfectly

What is mezzanine?

If you do not want your Andresol to merge with furniture, you can note the idea of ​​decorating doors.

  1. You can cover with artificial leather, paving a layer of foam rubber as a filler. Fix the door on the back of the door with a furniture stapler. And if you want your flaps to look more pathetic - create the effect of a carriage with the help of the same stapler, only from the outside. Clip Celers or plastic rhinestones with covered leatherette.
  2. If you glue the mirror cloth on the door, then the space of your corridor will visually seem more and higher. The mirror can be glued with a special glue, or silicone sealant.
  3. If you still decide to decorate the doors with wallpaper, then cover their layer of Glow glue, which will create a protective film and extends the beautiful look of your product.

Andresol with transparent doors looks stylish

It is easiest to build a suspended storage in a narrow corridor. Before making mezzani with your own hands, spend a small study. Using an indicator screwdriver or detector, check whether there is no wiring walls

If the devices that determine the presence of cables, you do not have, pay attention to the switches. Elektroommunications from them ideally go immediately up. Usually shelves hang on long metal corners, they will need 2 pcs

Drill in the holes of the hole in a step of 10 cm. If during the installation of the mezzanine to the hallway you work as an ordinary drill, while drilling ask someone to hold a working vacuum cleaner under the device. It will save you from the need to make major cleaning

Typically, the shelves hang on long metal corners, they will need 2 pcs. Drill in the walls of the hole in a step of 10 cm. If during Instalsi settings in the hallway You work as an ordinary drill, while drilling ask someone to hold a working vacuum cleaner under the device. It will save you from the need to make major cleaning.

Attach aluminum guides and align them in a building level. Manufacture of antlesole continuing the design of the bottom. Sometimes the lower wall of the shelf is made from plywood, but under the weight of numerous cans, clamshells and boxes it can progress. It is best for this purpose a wooden lining, a floor board or a common board with a thickness of 3-5 cm. Considering that in almost any apartment of the wall curves, each bar customize the width of the corridor separately. This will help make the design of the mezzanine in the apartment most neat.

Putting ready to put on corners, cut the last board along in accordance with the edges of the corners. Fix the wooden elements with self-draws, four for each bar. Believe the bottom of the plastic panels or paint them into the color of the walls with paint or varnish. Approximate design well demonstrate our photos .

From several narrow slats, collect the door frame and screw it to the walls, after aligning the level. Put on the door hinges for the antleasy, screw the handles. Doors can be made of MDF, chipboard, as well as out of matte translucent plastic or glass.

The mezzanine is small cabinets located under the ceiling in the apartment. Such an interior solution is an ideal option for small rooms in which the lack of space for storing things is constantly felt. Usually, lockers are placed in an entrance hall, a corridor or kitchen above the door. Andresoli can easily make it yourself. It does not take much time and money.

At the same time, it is very important to pay attention to the fact that the doors for the antleesol have successfully fit into the overall design of the apartment. If you already have a storage place, and you want to update the interior, you can simply change this detail

Installation of the shelf does not require special skills and can be carried out not only by professionals, but also by an ordinary person who has not come across this task earlier. All you need is to provide possible errors in advance and try to avoid them. To do this, you should familiarize yourself with a number of recommendations on the installation of pantry and comply with the rules related to the installation.

Vertically opening storage room

The correct calculation of the load. It is better to move better than the opposite. The safety margin will ensure the reliability of the mezzanine and will allow heavy items into it. For a high level of load, additional suspensions and profiles use the shelf to strengthen the shelf. It is necessary to ensure its strength in any case, even if it is originally not designed to store heavy items. Ention. Few people think about the improvement of ventilation in the ceiling pantry. All you need is to make holes, you can even in the doors. It will help to avoid the shaft smell and help keep things in good condition, even if they are "locked up" for a long time. Conveniently when at the mezzanine is installed at least one lamp

It doesn't matter how powerful it is, because it is still better than looking for the necessary thing in the dark or take the hand with a flashlight. Lighting in deep antlesol, where to look for items to the touch even more difficult.

A convenient feature that allows you to organize storage of things in the storage room, even if there is only one partition. Setting the door. Often there are open mezzanine or simply covered with a curtain. Aesthetics for each of its own, but installed doors in the storage room will help protect the contents from prying eyes and prevent the loss of things from the installed storage room. It is better to install the lock with the doors so that they do not open themselves. To take care of the appearance of the mounted storage room is also worth it. It is better to arrange it outside to become the rest of the interior of the room. At the same time, two options are: or the finish looks in accordance with the walls, or as a continuation of the ceiling.

Finishing shelves under the ceiling room

Andresol is a useful element in any room. Each person has those things that are not needed, but "may be needed" and such a small storage room will serve as a place for storage. In addition, it can be used as a warehouse for tools, billets for the winter or bulky things that occupy a lot of space in the closet.

Each of the above councils is not mandatory, but will help create high-quality mezzanine, which will serve not one year.

ЛYude, living in ordinary apartments, know how lacking places for storage of things, because many of them should be at hand. Here → An attic (according to the link it is called how to make a room in the attic) would be very useful, but there is no place in the apartment of a multi-storey house. In replacement, the attic can make mezzano do it yourself .Content. one. Determine the type of mezzanine. 2. The advantages of installing the mezzanine between the walls. 3. How to make stationary mezzanine with your own hands. 3.1 Fastening the mezzanine on wooden bars. 3.2. Mounting annetsol on a metal profile. four. How to make furniture mezzano with your own hands. The human space is located at the level of its growth, and the entire volume is used to be ineffective. Andresol - a locker or shelf installed under the ceiling - will allow placing a lot of things using a minimum of housing space.

But it is often a question how to make mezzano, puts in a dead end. Tell me in order.

Determine the type of mezzanine

It can be: one. Stationary mezzanine, fixed on the walls; 2. Furniture mezzanine installed on the cabinets.

What type it is better to choose, you will tell you the placement of the situation. Since the mezzano will regularly be over his head, its reliability is a vital aspect. Try to avoid console location, that is, the fastenings of the shelves are only on the one hand.

Good accommodation option - between the walls . Immediately suggests: the mezzanine must be put in the corridor or non-smoke room (for example, bathroom or bathroom).

Advantages of installing annetsol between the walls

one. Fastening from two (three) sides. 2. The possibility of increasing depth without increasing torque. Simply put, the extra weight of the design does not pull the mount from the wall. 3. It is necessary to decorate only two planes of the mezzanine - the front and lower.

Output : If the mezzanine is located in a niche between the three walls, then work on its manufacture is reduced to the device of the shelves and hanging the door.

How to make stationary mezzano do it yourself

Mounting mezzanine on wooden barsSeveral general advice on how to make mezzano do it yourself before proceeding to practice.

one. The bottom of the product should be at a height of at least 2 m. From the floor, for the mezzanine - the remaining space. 2. When placing above the door, set the lower plane of the shelves along the top of the door. This option is most practical and looks aesthetic. 3. Do not leave the free space between the riding design and the ceiling. This dead zone will only collect dust. four. Andresol, located close to the light source, stares the room.

There are two reliable methods of fastening the mezzanine.

Mounting mezzanine on wooden bars

In the bar of the required length drills the holes in a step of 25 cm. In terms of the level of blackcloth horizontal line on the wall and apply the bar. Through the openings we plan on the wall mounting on the wall. Drilling holes with a depth of 60 mm, insert plastic plugs - dowels. We apply the rail and fasteners with self-drawing. Similar operation perform on the opposite wall. (Fig. 1)

Mounting annetsol on a metal profile

On the perimeter of the Niza mezzanine, the ceiling profile Mon 28 × 27 mm and bind it with crossings from PP 60 × 27 mm profile. Bottom frame with a leaf of plasterboard (more on working with plasterboard can be found → here). From above, we perform flooring from an OSP or thick plywood, rather hard so that the shelf does not bete under the weight of things (Fig. 2).

With a significant span, the mezzanine inside arrange an additional mount to the ceiling by suspension. Doors of the antlesole make swing or sliding. You can decorate them with a veneer, self-adhesive film, paper, or just to paint enamel paint.

By collecting the shelf itself, the doors of the desired size can be ordered in the furniture workshop, it will cost it inexpensively.

How to make furniture enezol do it yourself

Крепление антресоли своими руками на металлическом профилеFurniture mezzanine, in fact, is a small → wardrobe, we have already told about the device of this type of furniture, you can read the link.

The main requirement for such annezoly will be a coincidence of style with existing furniture. Before you start doing the mezzanine with your own hands under the finished furniture, select the material of identical coloring and texture. Pick up the fittings. In the quality of the main material, you can use a furniture chipboard or OSP, already laminated. Either using self-adhesive paper, achieve the desired color and pattern. Cropped with each other canoe can be conventional metal furniture.

You can go to another way by completing the mezzanine with your own hands knowingly in a different style and color. How exactly will tell your taste. The finished product is simply put on top of furniture without additional mounting to the wall. In this short note, we described only the general principles of independent manufacture of mezzanine. For more information, ask questions in the comments on the mail.

Leave your tips and comments below. Subscribe to

Newsletter

. Successes to you, and good your family!

Добавить комментарий