Simple basket of newspaper tubes for beginners

Weaving from newsstand - Popular machinery for the manufacture of various baskets and organizers. We will tell you how to learn to make newspaper tubes and give step-by-step instructions for making a rectangular basket. We chose a rectangular weaving precisely because to make it easier. If you have never tried to weave any of the newspaper tubes with your own hands, this master class is just for you. However, experimental masters also have something to see, just miss a step about the manufacture of the tubes.

Basket made of tubes

The finished product is very beautiful and functional. Where to adjust it, you will find exactly. What is especially valuable, baskets from newspaper tubes are distinguished by durability, so it is suitable for storing almost anything.

What do we need?

  • Many newspapers (ordinary)
  • Tight cardboard (from it we will do the bottom)
  • Box-based (take an unnecessary, because we will cut it to lay down, and then throw it away)
  • clothespins or paper clips
  • glue
  • Paint and varnish for crafts (not required)

Weaving from the tubes

How to weigh a basket?

Let's start with a step-by-step instruction on weaving tubes for beginners.

So, to make a tube, we need to take one newspaper page and cut it exactly in half. Like this.

We take the needle or some wire and begin to twist the sheet at an angle, as shown in the photo.

Weaving from the tubes

When they reached to the end, the tip is fixed with glue.

Weaving from the tubes

Screw with dozens of other such tubes. It is difficult to say exactly because the size of the selected box is different.

We take the cardboard from which we will do the bottom of the basket (note that the bottom must match the size with the box that we took as a workpiece). We make markers through equal segments, as in the photo. Note how angles are placed. Let the tubes get on the bottom of the box about 3-4 cm. Fix them with clothespins and gently glue.

Weaving from the tubes

Take the cardboard exactly the same size. Now we wake the first cardboard with glue and cover the second so that the short ends of the tubes are inside. We put on top of some press so that the cards are pretty "grown", and wait for the drying of the glue.

Weaving from the tubes

If there is no press, just cliches the clothespins.

Weaving from the tubes

We do for weaving

The first row we do simply: we cling our tubes one for another, that is, the neighboring neighbor.

Weaving from the tubes

We put the box on our design, pour up and fix clothespins.

Weaving from the tubes

So the corners are so worked.

Weaving from the tubes

Now we take another tube and we do for weaving the side walls of the basket.

Weaving from the tubes

Move the clothespins when you dissemble the bracket for the brave, then fix that nothing falls.

Weaving from the tubes

Weaving from the tubes

As soon as the tube is over, the tip is fixed with glue, we take a new one (or simply insert them into each other).

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Web carefully: one tube per one. When we understand that it has already reached the desired height of baskets, we carry out the final stage of weaving. Carefully look at the photos - this is a step-by-step instruction. Repeat everything step by step.

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Weaving from the tubes

Now you can take paints and give a handicraft desired color. In fact, we did all of the paper, so the product will be easy to transform. When everything is ready, cover the basket with varnish so that moisture and time did not spoil it.

Basket made of tubes

The basket from the tubes is ready!

I came across the network on such creativity as weaving from newspaper tubes. Interested, I decided to try. Revised not one dozen master classes. Externally products are not inferior to the wicker from the vine. And for home use, they are pretty durable and for a gift - nice! Using when weaving various varnishes, paints and impregnation for the coating, you can create a wicker of all the colors of Rainbow. And decides the baskets with beads, flowers, ribbons or appliqués in the technique of deck, and you can Turn them into works of art. What happened to me. You will need: 1. Newspaper sheets2. PVA3 glue. Knitting needles4. Scissors, stationery knife5. Paint (acrylic), varnish (finish lacquer), alcohol base (Origar, larch, lemon ....) 6. Tassels for glue and paint.7. Basis for weaving

% image_alt%

Operating procedure:

First, you need to determine the direction of the paper fiber. The direction must be longitudinal. You can define the direction in several ways. Here is one of them: stretch the edges of the sheet of paper between the nails of the two fingers. In the transverse direction, the fibers of the region will become wavy, the folds are not formed in the longitudinal direction. From the strips of this size will turn out thin tubes for the elegant product. If the tubes are needed, the width of the bands and the diameter of the knitting needles need to be increased. I paint the tube with a tassel on the usual oilcloth. I use only morons on an alcohol basis. On the recommendation of one master class, it tried to paint the tubuings with a water-based venue - everything spoiled. From wetting the place of gluing diverges and the tubes are unfolded. Do not repeat errors. Stage 1: Preparation The newspaper is placed on 7 cm stripes. % image_alt%

On the lining board, cut the newspaper on the strip by the stationery knife. % image_alt%

The angle of the position of the spokes on the newspaper strip is 10 ° -15 °. % image_alt%

Starting a strip is needed very tight, winding the edge of the newspaper. The tubes are obtained white if the white box of the newspaper strip is left to the right. % image_alt%

The edge of the newspaper is secured by glue.

% image_alt%

% image_alt%

Finished tubes at this stage can be used to paint in the right color and enjoy well. You can paint and after the ready-made product. And if you cover paint and on top of a varnish - then no one guess that this basket is made from an ordinary old magazine (newspapers).

% image_alt%

2 Stage: Weaving Work Let's start with the bending of the bottom. It all depends on the size of your product. For weaving, presented to your attention baskets, it will take 30 (thirty) tubes with a length of 50 cm. Berem 10 tubes (hereinafter: a petitioner) 45-50 cm long laying out them with pairs.

% image_alt%

The working tube is folded in half and pay her the first couple of races.

% image_alt%

The start of work can be marked on the edge of the ray.

% image_alt%

We get the rope every couple of rays. The working tubes are crossed, then one working tube is on top of a pair of rays, the other below. As soon as the length of the working tube ends, we increase it (insert the end of the next tube into the hole of the previous one).

% image_alt%

% image_alt%

We ride two rows to a marker marker races.

% image_alt%

The third and fourth row weave in one ray.

% image_alt%

Working tubes We send to the middle of the bottom.

% image_alt%

We form a bottom rote. The first radiator (marked marker), we envelope the next, directing it to the center of the bottom and so in a circle.

% image_alt%

Last Lucket Return from the bottom in the loop of the first ray.

% image_alt%

Next, we flourish the rope every ray 4 (four) rows, slightly flexing the rays from the center.

% image_alt%

5 (Fifth) Row decorated with wooden beads with a diameter of 16 cm. You need 6 pcs. Beads.

% image_alt%

% image_alt%

6 (sixth) and 7 (seventh) rows, knit rope. The work is practically finished! It remains to trim the excess length of the working tubes and fill them between the rows with the help of knitting needles.

% image_alt%

The bred ends of the working tubes cut off with scissors.

% image_alt%

To execute the handle of the basket, we leave 3 (three) rays on each side, separating them on the linen clothespins. We drip around the leak of glue at the base of the remaining races and cut them with scissors.

% image_alt%

% image_alt%

% image_alt%

We connect the ends of the tubes of the handle of the basket.

% image_alt%

Before starting weaving the handle, on the edge of the tube we drip the leak of the glue and fix the clothespin. We carry out the handle with the tube along the entire length.

% image_alt%

% image_alt%

At the end of weaving the handle to the end of the tube dripping the leap and fix the clothespin. The main work is completed.

% image_alt%

3 Stage: Coloring For strength, we feed the basket with PVA glue, let us give it the desired shape. We give glue to dry completely.

% image_alt%

Basket paint white acrylic paint. (You can add a koler-paste, different dyes or paint the verse).

% image_alt%

Cut out the motifs from the napkin and make the deck of the Page. Cover the finish basket - varnish, sew the finished job.

% image_alt%

% image_alt%

% image_alt%

% image_alt%

% image_alt%

There is nothing better - than the thing made by your own hands. Rely, rejoice, give as a gift !!!

Weaving baskets from newspaper tubes are step-by-step for beginners (90+ photos). How to start and complete?

Weaving baskets made of newspaper tubes

The popular way of registration of the interior is weaving baskets from newsstands: a simple occupation will make it possible to create real creations of art.

Weaving baskets implies the use of rope techniques, with its help you can create beautiful products for home decor. In such baskets it is convenient to store threads for knitting, needlework items and other accessories. The finished Lukoshko is not different, so it's not worth putting it with a lot of weight.

Basket of newspaper tubes

Basket of newspaper tubes


The basket of the newspaper is well suitable for storing decorative fruits on


: It serves as an interior item than the means to carry things.

To independently make a basket with your own hands at home, you can use the master class for beginner needlewomen. All that will be needed is to prepare the necessary materials and follow the proposed step-by-step instructions with photos. The process is so fascinating, which will allow even children from 7 years old.

For work you will need:

  • paper is better to take the newspapers with a solid base: promotional leaflets or magazines will fit well;
  • The needles - it will come in handy for twisting the pipes themselves: the thicker the needker, the thicker there will be a tubule, so it is better to take the size from 2.5 to 4 mm;
  • PVA glue - for assembling the base;
  • scissors;
  • Acrylic paint, varnish or verse - for finishing the finished product;
  • fixtures for basket decor.

Prepare all the necessary materials, proceed to work.

To begin with, we cut the magazine on the strip 5-7 cm wide, from which it is further twisted the tube.

Take the needle and put the end of the strip to it, gradually winding around the axis: we get the first tube that you need to fix the drop of glue at the end.

Depending on the size of the future product, the number of tubes will be determined. For example, for a basket with a diameter of 14 cm, it will take 40 to 50 paper blanks. By increasing the height of the basket, it is necessary to raise the number of blanks.

At the next stage, we turn to the creation of the base for the bottom part.

We put 4 on 4 pipes, forming a cross. For strength, the cross is recommended to miss PVA glue so that the base is more reliable. The cross is considered one of the easiest ways to manufacture the basis, therefore is often used in master classes on weaving for beginners.

Next, go to the weave bottom.

  • We take one tube and fold it in half, forming a loop. We put it on the resulting 4 tubes as shown in the photo. After that, we proceed to weaving the rope.
  • Rope weaving is carried out in this order of work: the tube, which is in front of twisted back, and the one that was behind - on the contrary, turns forward. So it is necessary to scream several rows until the sticks are run out. When they end, make up - just insert a new workpiece into the opening of the old and secure glue.
  • After registration of 2 rows of 4 tubes, they must be divided and continue the weaving after every 2 newspaper sticks. This will give the basis of special strength. The next step will be braided by 1 separated tube, as shown in the photo: As a result, the number of rows will depend on the future bottom diameter.
  • Paper blanks involved in weaving, cut off and sweep inside, the bottom in the end of the end is sampled and fix the clothespins to complete drying. After that, we begin the rise of the basket walls to proceed to the manufacture of lateral parts.

Next, proceed to weaving the wall.

  • Again, we make a loop from the workpiece, we put it on the wall tube and wept the rope in the same way as worked with the bottom.
  • The number of rows depends on the height: so that the basket holds the form - put on the bottom of the bank and wept it.
  • To finish weaving, we also cut the ends and bend the workpiece inside, squeezing with glue.
Beautiful decor

Beautiful decor

We proceed to weaving the handle.

  • To do this, it is necessary to leave 3 tubes from opposite sides of the basket and label them.
  • Weaving must be carried out at once from two sides of the product, gradually narrowing it to the center of the basket.
  • At the top of the ends connect with scotch and disguise under the basis of the handle.
  • The final stage is the finish of the product: mix a bit acrylic white paint, water and glue and pass through this composition around the perimeter of the walls.
  • It is also necessary to paint the bottom of the product. To dry the basket, turn it upside down and leave for several hours.

The final decoration of the finished product occurs at the request of fantasy. Do not forget to open the workpiece with varnish for the reliability of the connections. Decorate the basket with ribbons, decorative colors, rhinestones or with the help of Decoupage technique: the masterpiece will glad and give a great mood.

How to sew curtains for kitchen (short, balcony, roman) do-it-yourself + 70 stylish novelties photo ideas for design 2018-2019 + reviewsSee also: How to sew curtains for kitchen (short, balcony, roman) do-it-yourself + 70 stylish novelties photo ideas for design 2018-2019 + reviews

Weaving knob

One of the main parts of the basket is a high-quality handle, because it will be useful to transfer products from place to place. The handle should be dense and durable, it can be decorated at will: make a braid with a ribbon, stick artificial stones and rhinestones, and just decorate with color acrylic. Make a handle in several ways:

  • openwork weaving;
  • pigtail;
  • Rope.
Technique weaving knob

Technique weaving knob

In this master class, the manufacture of a reliable and beautiful handle for the basket in the braid technique of pigtails will be considered. At first glance, it seems that the method is complex and cannot be explained, however, after performing step-by-step actions, after 1 hour, you can enjoy the finished wicker handle.

For work, you will need 6 long newspaper tubes along the length of the handle, color blanks for bracket brackets, as well as twist for weaving the spit itself.

We proceed to work step by step:

The handle must be high quality

The handle must be high quality

Crafts from paper sheet do it yourself with step-by-step instructions. Top 7 best master classes + 130 photosSee also: Crafts from paper sheet do it yourself with step-by-step instructions. Top 7 best master classes + 130 photos

How to make a lid?

If the basket is braided open, then it is enough to make handles for it, and it will be ready. When the construction of the design with the lid is supposed, then the upper part of the product is shut separately. To independently make the lid, you can use a simple master class for beginners.


If you want to get a more patterned lid, it is worth choosing those master classes that are based on openwork or chess weaving - then the drawing will be clearly seen on the surface.

For work, prepare 2 circles of cardboard, on the diameter of the corresponding finished basket. Circle can immediately decorate: perform a decoupage, sharpen acrylic or cover with a cloth. PVA glue, a lot of newspaper tubes of one or more colors and varnish.

Beautiful wicker cover

Beautiful wicker cover

We proceed to the process of creating a simple but beautiful lid:

  • Two Carton Circles need to be glued together, pre-placing around the circle, rays of newspaper twists.
  • Weaving is performed in rope technique or by layering. Four main ponds are inserted through one radial twist and begins the bracket of the circle from the cardboard.
  • All 4 pntures are used at once: first they are started over the newspaper tube, then spend on the next tube. As a result, it turns out beautiful border on the contour of the cardboard. So the entire circle is soaked on the diameter of the basket.
  • To make the lid's sides, the blank is applied to the basket and beams beams down the bending racks per rack. Weaving continues in the above technique. Ends are cut and bend inside, lining.

The finished cover should dry, then it can be decorated with its own way.

How to make roses from paper with your own hands: Step-by-step instructions for beginners (+190 photos)See also: How to make roses from paper with your own hands: Step-by-step instructions for beginners (+190 photos)

Methods of weaving baskets

The wide popularity of the manufacture of beautiful baskets from newspaper tubes provoked the development of new techniques. If earlier weave the basket could only be the method specified above, then modern craftswomen do not sit in place.

They come up with new ways to interlacing blanks, as well as various schematic patterns. To learn more about each of the types of weaving, we suggest to consider a consolidated table with a description of the methods.

Suitable as a gift

Suitable as a gift

Equipment Description Where applies?
Twisting spirals The technique is considered one of the simple, judging by the reviews of the needlewoman, even a schoolboy can cope with her. The essence of the method is to gradually increase the height of the product due to the circular weave of the tubes. Each new billet is superimposed on the previous spiral. Used to create high decorative baskets, as well as attractive VAZ of an unusual form. With this technique it is easy to make a stylish piece of decor for the interior.
Layered The technique implies the manufacture of a basket immediately from several tubes. For the convenience of weaving, several ropes of rope technique are first performed, insert additional tubes into the support holes and the walls are started in a circle of each tube at the same time. It is used to create baskets of various shapes, as well as for designing patterns on the surface of the products. It is worth noting that the racks should be an order of magnitude stronger billets for braids.
Rope This weaving method was considered in the master class above, where the manual for creating the original, but simple basket for beginners is step-by-step disassembled. Weaving technique is used to create uncomplicated round and square-type products. This method is suitable for learning novice masters.
Spiral weaving Do not confuse methodico with twisting on the spiral - they differ fundamentally. This method implies weaving at an angle Spiral weaving is suitable for the manufacture of small and high items, such as narrow baskets, glasses, VAZ.
Kosichka There are 2 types of this method - edge and invoice. The first option is used for weaving the rack counterclockwise, while the tubes take out the outward, then inward. The invoice methods implies the use of several twists, powered by the edge at once. Baskets made by such weaving look more elegant. The texture of the pattern resembles a real basket of a yv vine.
Openwork Learn such a weaving is easy - externally it looks like lace. It consists of holes and patterns. The technique is the synthesis of simple and complex techniques. Original baskets of openwork weaving are open or closed. They are well suited for the presentation of the gift of the birthday girl as a packaging box.

The considered weaving methods will help better understand how to make a basket properly. Beginner is better to use a rope technique or spiral twisting, more detailed descriptions of these technicians will be presented in the course of the material.

175+ Photo Crafts from felt for the new year of the dog do it yourself: patterns and schemes for beginnersSee also: 175+ Photo Crafts from felt for the new year of the dog do it yourself: patterns and schemes for beginners

Baskets for linen

The main advantage of the work in this technique is its practical side: having learned to weep the baskets of the girlfriend, you can easily create items for household item.

One of these useful devices is the laundry basket - the work is performed simply, the difficulties are linked only in the size of the product itself. To spare the basket for linen made of newspaper twists, stock patience and necessary materials.

Linen Storage Option

Linen Storage Option

Prepare materials and tools:

  • Dense cardboard, some needlewomen use corrugated cardboard;
  • Wallpaper or colored paper pasting paper;
  • Paper tubes, pre-painted in the required color and veil coated;
  • Colorless varnish;
  • PVA glue;
  • Fabric for liner on the base.

Closhes will also need to secure the bottom during its drying and heavy items, such as a hih or a stack of books. Not superfluous will be the box, in the size of which the basket braid will occur. It will add the bottom of stability and makes the basket of the right form.

The first thing you need to do is paste


On cardboard and wait for drying. After that, take the harvested tubes and distribute them along the bottom, fixing the glue. On sticks it is necessary to impose a second sheet of cardboard and firmly copper with glue and clothespins, waiting for complete drying.

When the material is dry, you can move to the walls of the walls. For this tube, bend with each subsequent convolution and pull up. In the center of the bottom, a box of suitable size is installed so that the weaving has acquired the correct form.

In this paper, use the technique of layered weave at once with several tubes .

You can use both one-color convolutions, so apply two-color options. The tube is starting for the base of the axis, then it is displayed in front of the axis - thus, weaving is obtained, similar to the Citz fiber.

When the height is achieved, you can proceed to the manufacture of the handles. To do this, on the opposite sides, the basket make lifting rows that imitate the handle. At the end of the operation, the tube is cut and hide inside, fixing glue. The trim of the basket is made up by their own way: it is often a single-color defrosting acrylic paint.

Crafts for the new year 2020 do it yourself (120+ photos) - surprise your loved ones with your fantasy (+ reviews)See also: Crafts for the new year 2020 do it yourself (120+ photos) - surprise your loved ones with your fantasy (+ reviews)

Fruit basket

It is always easy to find practical use of things made by your own hands. For example, a good idea will be the manufacture of fruit baskets: the product can be used instead of a metal fruit and put inside the non-heavy fruits. Some baskets in finished form are capable of holding a lot of weight, everything will depend on the technique and the density of weaving.

You can store fruit

You can store fruit

To independently make a beautiful fruit basket, prepare newspaper tubes in the amount of 310 pieces - their length is 27 cm. The tubes are recommended to be pre-painted by such a composition: to take 2 tbsp. l. Acrylic varnish and mix with a colon of the shade. Treat all tubes and start step-by-step work.

Stage Description
DNA formation The bottom is performed in the rope technique using the cross for the base. Take 12 tubes, divide them into groups of 3 each and glue the cross.
Breaking DNA Glowing in the specified 6 rows techniques, the resulting 3 tubes immediately, and then start to flip 1 convolution. It is necessary to spit until the bottom of the desired diameter is turned out.
Formation of sides To make lifts for weaving the design of the structure, you must insert into each hole with a stick for another 3 tubes.
Weaving side Nading bottom on a round item, such as a wooden bowl, you can continue to work. It can already be placed on the use of layers in layers: it is performed in 2-4 rods and will be much more reliable than the rope technique.
Creating an openwork In order for the basket to be elegant, you can create a picture: in the center of weaving it is easy to cross the adjacent bar, imitating the rhombus. Each connection to press the clothespin and dug new bars for further work.
Formation of knob When the main job is ready, proceed to creating a pen: with the sides of the product insert additional bars and create a handle, according to the master class indicated above.
Decor We finish the design at your own desire: we paint with multi-colored pigments, make inserts from the fabric.

Such a basket does not need a lid, because it is designed to store fruit. The handle of the product can be spectacularly decorated with a rose from the phoamyran.

The most interesting needlework do it yourself for the house (+175 photos). Creative master classes for beginnersSee also: The most interesting needlework do it yourself for the house (+175 photos). Creative master classes for beginners

Weaving baskets of different shapes

For different needs, baskets of different shapes are used. For example, a rectangular high basket will be useful for storing linen, a square or round is suitable for storing sewing supplies, and an oval design will become an oval design for the holidays. Detailed master classes for the manufacture of each form are presented below.

Model square shape

Model square shape

Square basket

This type of product is perfect as a desktop bread box. It is enough to put inside the liner from the fabric and a beautiful bread box for serving guests to the table - ready. The work will be based on the use of a special device that helps faster to weigh the base of the product.

To make such an auxiliary device, it is enough to take a sheet of cardboard, bend it in half along and after 2 cm from the folding hole to do the holes for the tubes. You also need to prepare a large number of paper or newspaper branches.

To make a basket more like a straw, make twists flat.

  • Sticks for the base insert into the holes of the cardboard so that most of them are closer to operation.
  • We begin to catch the bottom: take a long tube and insert it next to the cardboard, then we work in the technique of rope weaving. When we achieve the desired perimeter of the square, the bottom finish.
  • For the formation and lifting of the walls insert new rays around the perimeter of the square: bend the twist in half and felt in the hole, capturing the nearest tube. Fix the place of attachment with scotch and clothespins.
  • We begin to swell the walls until the moment is not obtained. For ease of work, we put the design on the square box.
Can be used as a bread box

Can be used as a bread box

When the work is over, you can attach the handle or weigh the cover additionally. Such a basket will not only serve as a breadpage, but will become a good packaging box.

Oval basket

The product of oval type is considered the second most popular after a round basket. . Such a form is more roomy and involves using a box, packaging box or just for storing sweater accessories. The product itself decorates:

  • flowers;
  • ribbies;
  • threads;
  • A variety of textiles.

All the same materials are needed for work:

  • Newspaper tubes from strips of 11x28 cm;
  • knitting needles;
  • glue;
  • Morida;
  • varnish;
  • Decor.

The first stage is traditionally considered to manufacture crossmen: in a rectangular design it looks and is done differently. Since weaving rope is used in 2 tubes, it is necessary to turn double twists across.

One of the most popular forms

One of the most popular forms

The first two rows are inserted on one and two tubes, the rest of nine rows are wearing one. In the middle of work, add additional racks by quantity equal to the number of main racks. After that, the transition to flights is done. Next, boards are wearing, through 5 rows it is necessary to make holes for the tape - you can not do it if desired.

So that the holes were smooth, they are aligned with dense cardboard. The remaining part of the product is treated with the usual method.

The finished basket will be the perfect gift for a woman who is engaged in needlework. Also in the product it is convenient to put the handkerchiefs for storage or any other textiles. After completing the design, it will be a good gift for the younger generation.

Fit into the kitchen interior

Fit into the kitchen interior

Gift with your own hands? What easy and quickly can be done? 12 excellent options for all occasionsSee also: Gift with your own hands? What easy and quickly can be done? 12 excellent options for all occasions

Openwork basket with their own hands

One of the most beautiful types of baskets is an openwork variety. To weave the product, you can use complex techniques, creating smooth transitions from one pattern to another.

If the difficulties are not for us, we recommend using the master class below, which will teach easily and quickly make an openwork .



Step-by-step instruction
  • Prepare materials: newspaper tubes will be needed - how to weave them, it is already known. The number of tubes depends on their length, as well as from the height of the basket and its diameter. To work, it is better to take 2 shades of sticks at once: one of them will be openwork patterns in the form of hearts.
  • We proceed to the manufacture of the bottom: it woves the same as in the master class on a round basket. Take 4 pairs of the tubes and glue them into the cross, wrapping the base in the middle of the PVA glue. The first row of the bottom will be fattered by 2 tubes immediately, starting from the second row to swell it is necessary for 1 stick.
  • According to this scheme, everything brokes until the desired basket is formed. Then the tube must be raised up - it is possible to do this manually or use the round dishes for a more smooth lift. Weaving the first two rows will occur on the technique of direct and reverse "Christmas tree" when the first tube enters the convolution, and the second is paved in front of it.
  • After the brave of the first two rows, the sidewall is injected with another color wand. With it, it will deteriorate another number of rows, for example, 2 rows. Then it is proposed to make an openwork pattern.
  • You can make an openwork pattern any form, in this workshop, the heart is used. It is very easy to do: the newspaper convolution twists the spiral, forming an oval. Each twist is inserted into the opening of the basket, the heart turns out: the top and bottom of the figure sticks the PVA to the supports.
  • Next, weaving continues: it is necessary to make as many rows as needed to obtain the desired height. The ends of the tubes are cut, and the tails are hiding under the other convolutions, everything is fixed with glue. As a result, it turns out a graceful basket with openwork patterns.

Such a product will be a good gift for a close person for Valentine's Day - you can put a beautiful postcard and chocolate. Also in such a basket it is convenient to store sewing supplies and flaps of fabric.

The original and romantic basket will be a favorite piece of decor in the children's room or bedroom.

Modern chandeliers and lamps: What are the suitable for the hall / kitchen / bedroom? 205+ Photo options with stretch ceilingsSee also: Modern chandeliers and lamps: What are the suitable for the hall / kitchen / bedroom? 205+ Photo options with stretch ceilings

Chess basket - Weaving scheme

To obtain an original and stylish product from newspaper tubes, various weaving schemes are used. One of the simple, but spectacular schemes is the method of "chess". This pattern can be obtained using a rope weaving with two colors, as well as in the manufacture of a basket with holes, where the lumens alternate with filled squares.

The picture presented in the photo is very simple:

  • First, rectangular bottom is made - it can be done according to master classes above.
  • After the transition to the lifting of the side, 5-10 rows are seated, and then chess weaving begins.
  • For each two supports, one newspaper tube is used, which interstates them alternately with a layering.

With this pattern, it is not only an original basket, but an organizer for storing magazines, as well as a decorative vase for colors from corrugated paper.

You can use the chess pattern in a monophonic design or two-color. Some craftsmen skillfully intertwine more than two colors in one product: as a result, it turns out a stylish and bright basket for needlework. It can be used for thematic photostles and filming.

Some needlewomen came up with an excellent lifehak for durable and even weaving onboard baskets : After the transition to the rise was performed and new rods were added for weaving, the upper rays can be fixed on the box with clothespins. Thanks to such tricks, weaving will not only become even, but the process will go much faster.

Can become a gift for the day of all lovers

Can become a gift for the day of all lovers

8Total Score.

Weaving from newspapers stands out among other techniques for creating baskets. Baskets, boxes, chests, vases, boxes - all this is really creating out of simple newspaper paper. People who are engaged in weaving baskets from the newspaper, involuntarily participate in the useful disposal of unnecessary papers, turning them into stylish and original masterpieces. After reading the information, please leave your assessments with argumentation in the comments. They will be useful for other readers. Your opinion is very important for us. Thank you for your participation. We appreciate each of your feedback and time spent.

The relevance of information




Accuracy of information



  • Available in value
  • Uncomplicated performed
  • Stylish result exceeds all expectations


  • Time to execute
Add your review  |  Reviews and comments

Wicker baskets made of paper vine (newspaper tubes)

Thanks to patience and ambitious masters, old newspaper pages are magically turn into completely unique things: unique panels, all sorts of carries, wall clocks, exquisite baskets and candy, vases and caspets, chests and caskets - do not list everything. Thanks to social networks and the Internet, an interesting ideas are flying around the globe, encouraging novice adherents of newspapers to take on a paper vine and improve their skills.

Newbies we advise not to start your creative way from large products. We understand that your plans for you probably ambitious. Hands so and it is scattered to weave a large box for linen or impressive dimensions of Lukoshko for a hike in the forest for mushrooms. We guessed?

But still we recommend at first to influence your fervor and start with work on small products. It is necessary to fill the hand and exercise in accuracy, which is achieved only by practice.

You can find a detailed description of the paper vine preparation process in our last article, starting with the manufacture of tubes and ending with painting and processing before weaving.

So, the preparatory stage behind: in front of you are ready for the work of the tube, and the outlines of the first basket have already been signed in the head, which you want to weave your own hands. Now you need to find a form for braid. A plastic bucket, a vase, a flower pot, a deep plate suitable for this.

Council . Newbies are better to start work, the fattened any object. Weaving without a form at first can cause difficulties, without support it is easy to squeeze its product and get it asymmetry. When using the supporting item, you can easily achieve an even location of the rows of the tubes and control the quality of the braid.

Shape for braid

And now we will tell you in detail how to make a basket from newspaper tubes for beginners, and open all the secrets of successful weaving and the neat appearance of the finished product.

Master class round basket without handle (weave in shape)

In order for you to decide on the necessary number of tubes and know in advance how much they need to be prepared, we give exemplary calculations.

For a small sized basket (with a soup plate), it will take about 100-150 tubes, on the product of the middle size, prepare them about 200-300 pcs. More than 500-700 tubes can leave for large baskets. It all depends on the type and density of weaving, as well as the lengths and thickness of the newspaper vine.

In this MK we will weave the basket of medium sizes. It will require 200-230 tubes spinning 1.5 mm, 8-10 mm wide.

Weave baskets from newspaper tubes: master classes of experienced craftsmen

And immediately give you another advice. No need to hurry. Try to avoid the gaps between the rows of weaving, having every row tightly to the previous one. Do not frighten the tubes while working, but also do not spare them. Seeing that they were blocked or disassembled, - ruthlessly cut them off and increasing new ones.

For a rings of a round bottom, fold the pairs of 4 tubes, making a cross. Another, working, cross in half.

Fold pairs 4 tubes

Start the sovereign to be taled, walking the first rope. Thus, perform two more rows.

Wearing the Cross

In the fourth round, dwy the dual racks and continue to flip them separately. Try to weave as close as possible to avoid lumen. Perform three rows of weaving.

Divorce dual racks

The distance between the racks by this time should increase and become more 2 cm - it's time to enter additional racks. Do scissors or seed a hole and insert an extra rack, pinch a bit of polymer glue for reliability. Do not forget to check your actions with filed step-by-step photos.

We enter additional storeki

Tilt the added racks by the rope before receiving the bottom of the desired size. Baskets are ready.

Take the form you choose, which will serve as a temporary basis for the future basket. In our case, this is a deep inverted plate. Place a weaving on the shape and gradually bend the racks along it to transition to the walls. Keep the sidewalls to the rope.

Weave in form

Put something heavy on top of your workpiece to secure its position.

Treat shape

If you want to work like this, turn the weaving. Upload a basket to the desired height and cut the operating tubes.

I turn over weaving

Next, follow the bending "Rope of 4 tubes" (last article we told in detail about different types of bends).

Cropped working tubes increase to bended with different color (in our case blue), and another 2 blue tubes are tailbled behind the racks.


Take the left left blue tube and boot over the fourth rack similar to the weaving a simple rope. And if you were performing a rope of three tubes, then we would crash with three blue tubes, a crying every one of them for the third rack, and not for the fourth.


Take the left tube again, count 3 racks and start it for a free fourth. Perform weaving to the last free rack. This moment illustrates the photo below.

Rope in 4 tubes

Now it's time to finish working on a cradle. Take now Extreme right tube. After counting on it 3 racks, put it in the fourth and season the basket, without output. Continue weaving on this scheme with the remaining working tubes, laying the right one of them for the 4th rack inside the basket.


Check the tips in weaving, output them out and cut from the front side.

hide tips in weaving

It remains to lay white racks. Take one of them, count it three more and after the third stitching, the gross tightly under the blue pigtail, pulling out.

We put white storeki

Then take the following and similarly to put under the pigtail after 3 from it racks.




When all the racks are laid, it remains to trim and hide their tips.

Cut and hide tips

Completion of work on a wicker product involves its priming. To do this, it is possible to use a PVA solution with water in a ratio of 1: 1 or the composition of acrylic varnish + water in the same proportion. Thoroughly wake a basket with a primer using a soft brush.

Immediately want you to warn you: PVA with time can give yellowness. To avoid it, it is better to cover braided products with a solution of acrylic varnish. The latter must necessarily be on a water basis, it is possible to distinguish it from alkyd by absence odor.

Ground basket

After a complete drying of the basket (it will take about a day) quickening her acrylic varnish and leave to dry again. Highly thick varnish can be pre-diluted with water.

Do not be afraid that after such a manipulation, the product burns a bit, it is temporary. After drying, the varnish will become transparent, and the handicraft will take a finished look. You can give her a beautiful shine or an elegant matte texture depending on the varnish used. Recall that he can be a glossy, semi-convened, matte or half-man - choose to your taste.

Varnish basket

At the beginning of his creative path, be sure to glow such a basket for fruits or candies. As you can see, it turns out very pretty, which means you will not only be able to practice knit paper vines, but also make a great gift for all occasions.

If you have any questions, it is worth looking for a detailed video from Lada Ligai. In it, she tells how to spool the puzzy mini-basket.

Basket oval with a simple handle (weave without a form)

Now consider how to weave a pretty oval basket-baby. In this case, the bottom is woven in another way.

Oval basket

You can find in our last article by step-by-step photos and understandable instructions like weaving oval bottom >>.

We recommend a weaving process itself to see the master class live in the video from Alena Bugova. In its lesson, the author is understandable and accessible explains all the subtleties of weaving from the newspaper tubes of the oval basket.

From myself we want to add:

  • It takes about 100 tubes on this craft;
  • To obtain a color, as in the MK, it is necessary to strongly dilute water aqueous vehicle "Walnut";
  • The distance between the racks here is about 2 centimeters;
  • In a few handle tubes, it is desirable to insert a wire so that it keeps the form.

Such a cute miniature basket is an excellent gift idea for any holiday. For example, you can weave her to Easter and, filled with painted Easter eggs or sweets, present a gift set of people expensive to you.

Fighters for baskets

If you are new to and for the first time you work on the basket, we advise you to finish its edge with simple bends. For small and medium products, volumetric bends are suitable, such as rhoda or iside in 3 or more tubes. The technique of their implementation, we considered in our last article >>.

Also, the edge of the basket can be arranged by a bulk openwork oblique. You can see her various types and features of weaving in the video recommended by us.

The first lesson from Alena Bugova is devoted to performing a spectacular braid from the tubes with a plastic cord inside. Be sure to practice to braid it - such a flexion-decor turns a basket into a real masterpiece.

The second detailed and understandable video tutorial from Lada Ligai is as adapted as possible for beginners. In it, all the secrets of weaving volumetric braids and its correct ending are revealed.

Do not be afraid to experiment with a variety of bends. They are able to give the most simple product elegant and festive look.

We make a handle

The easiest handle

The photo looks like this:

Easy handle on a basket

For its manufacture, you need to take a bunch of 3-4 tubes, form the bending of the handle and attach the workpiece to the basket. Next, the wet tube neatly wrap the entire handle, periodically lubricating glue so that the winding fits tightly. For this work it is better to use polymer glue than PVA. He dries quickly and fixes, while the paper does not have time to spill.

You can take a thick wire (cable) tube instead of a beam and wrap it at once with several tubes. The process in the photo looks like this:

Pen on cable

Cutting a handle with a stem weaving

It looks like this:

handle with sortshene weaving

To work, take the moisturized tubes and immediately increase their length. Note on the basket of their location. Take the holes and insert the tubes in them. Sweet the tips until they dry, fix them with clothespins.

Remove the tubes the desired bending. So that they keep the form better, you can insert a wire with a thickness of 1-0.9 mm in advance. The working tube we swell these 3 main tubes with a simple terminal weaving.

Simple twisted handle

In the photo it looks like this:

Twisted knob

It is also fairly easy to make a newcomer. For small handles, you need to take a bunch of 5-7 tubes, in one of them you can insert a wire. Next, they need to be put, binding to the rope and gradually twisting.

We present you a detailed MK from Lada Ligai, in which each step is accompanied by a photo.

Twisted handle step-by-step process in photo

If you do not understand how to turn it out correctly and round this handle, the output is one - urgently watch a detailed video from the craftswoman.

Strong twisted handle for basket

It is better to produce it using a thick cable or a screw rod.

Durable handle

For the convenience of perception, we suggest you see the 3 stages of work on the handle.

Part 1: You will learn how to properly insert a rod rod into the wall of the basket:

Part 2: How to wind it with a paper vine:

Part 3: Features of the finishing of the handle with a beautiful coupling lock.

Openwork handle

Want to surprise everyone with an unusual and elegant look of your baskets? Then you urgently need to master the openwork knitting handles.

Openwork handle

Openwork handle

Openwork handle

For this method, each paper tube of the handle base must be reinforced with wire. Features of the work You will learn from the video recommended by us from Irina Chirkova.

Mapper in 4 tubes

Looks like a handle like this:

Pen pigtail in 4 tubes

Performed very simple steps:

Pen pigtail in 4 tubes

Pen pigtail in 4 tubes

Pen pigtail in 4 tubes

Pen pigtail in 4 tubes

Mappy from 8 tubes

The photo presents how the handle is woven with an ordinary volumetric pigtail of 8 pipes.

Pipe handle 8 pipes

If you lack the thickness of the handle, then you can insert a cable, a television wire, a thick wire or a beam of paper tubes. Thickened option will look like this:

Pen - Movement of 8 tubes

Pen - Movement of 8 tubes

The process of weaving such a pigtum is described in detail in the video from Olga Ryzhkov.

Below are phased photos of the attachment of the handle to the basket and accurate locking the castle:

Wooden handle

Also as a handle, you can use a conventional thick branch. Stroll in the nearest park - and get the material absolutely free. The found branch is needed to sprinkle to the desired form, clean, removing the bark, stamp for smoothness. Optionally, you can paint the wood with a vest and coat with acrylic varnish.

Look at how beautiful and unusually look like pens on baskets.

Sew case for basket

The last and optional stage of work on the basket is to decorate it. You can make your wicker cradle by catchy artificial flower, satin ribbons, a bright bow or sew a nice fabric cover.

Went covers

Its function not only to decorate a basket, but also protect the walls from pollution and facilitate her care. In addition, you can close the flaws of weaving in their first works, giving them an impeccable look.

From this video you will learn how to sew a casing case with a round bottom.

If you splured the basket with a square bottom, look at how to sew a fabric liner. It will take only three measurements and any complex computing and patterns. All details in the video.

Ideas for inspiration

Now that you are familiar with the basics of weaving the simplest products, we want to offer you a photodification of the works of different craftsmen. Here you will find not only an Easter basket made of newspaper tubes for beginner newsletter lovers, but also all sorts of options for all occasions.

Round, oval, rectangular, with unusual bends and handles - look at them, inspire and do not be afraid to create your own masterpieces.

And let your first basket fails such as in the picture, but you manufacture it yourself, with your own hands. And the experience, accuracy and speed of weaving will necessarily come together with practice. The main thing is always trying to work with a good mood and set up - and everything will turn out!

* When copying an article, please specify an active reference to the source of

You can create unique things without spending a lot of money. A bright example is a weaving from newspaper tubes. Of course, it will take a lot of time. But, besides satisfaction and joy of creativity, you will become owners of original and beautiful crafts. A problem with gifts will be solved - they will make them with their own hands.

Preparation of tubes

Before starting weaving, it is necessary to prepare the source material - turn the tube from newspapers or magazines. You need the paper itself, PVA glue in a bottle with a dispenser, a long pushing needle or a piece of rigid wire. The diameter of the knitting / wire is 1.5-2 mm. These are all tools at the preparatory stage.

This mountain of the material will have to prepare))

Many ideas are a lot of material!


To cook the tubes, you must first cut the paper into pieces of the desired size. Newspaper strips or journal reversals are cut into several parts. Aspect ratio - 1: 3 or 1: 4 (for example, 27 * 9 cm, 35 * 10 cm). Exact dimensions are not important. Divide the page into several parts so that they are approximately indicated above the aspect ratio.

Take the knit and paper strip. Corner paper spin around the knitting needles, gradually, layer behind the layer, roll the tube. The edge of the strip is fixing the liner's drop. In order for the tube to get the desired density, the paper is placed under 45 ° in relation to the needle. Then it will be tight enough, but at the same time it will be good.

That's how paper tubes are made for weaving

That's how paper tubes are made for weaving

Take out the needle. The tube is not too long, for work will have to split them. If everything is done correctly, one of its edge turned out to be subtle, the second - thick and hollow from the inside. To connect two newspaper tubes, in a thick part, we drip several drops of PVA glue, insert the second tube with a thin edge. Now we wait until dried.

Painting and other processing methods

Sometimes, for simpler weaving, the tubes are rolled using a regular pin. They become more flat. In this form, it is easier to work with them - stretching between rows. But this is an optional stage. Try the "rolling", maybe you will like the braid from the newspaper tubes more.

Not everyone likes "Natural View" Weaving from newsprint. To improve the appearance, the screwdered tubes are painted. It is best for this acrylic paint. She lies tightly, behaves perfectly with any type of paper, does not flow, quickly dries and does not smell. Water moisture resistant veil is suitable. Paper tubes covered with acrylic varnish are not bad, which immediately added the painting pigment. Simultaneously with the painting, they become less sensitive to moisture.

Some colors of water milling for dyeing paper tubes

Some colors of water milling for dyeing paper tubes

To paint each tube with a tassel - long and mutually, so they are looking for a long tray in which the tubes are stacked. Paint is poured into it, ready-made newspaper tubes are lowered into it. Then they are laid on a layer of polyethylene for drying.

Before starting weaving, the "newspaper vine" begged well, you can moisten it. Better and easier to do this from the spray gun, just sputting water.

Start of weaving - form a bottom

Most products first need to form the bottom. There are two options: make it from the cardboard, to the edges by gluing the rack. The option is simple and understandable. Perhaps for beginners it is better - the walls of weave a little easier than to give the form to the bottom. And that the ends of the glued racks do not "scratch" the eye, they are covered by the second same piece of cardboard.

Bottom of cardboard for weaving from newspaper tubes

Bottom of cardboard for weaving from newspaper tubes

Of the features: in the corners it is necessary to glue a double number of tubes. One will be on the one hand, the other - on the other. In addition to the above option, there is another way - stick them not at the corner, but on both sides. In this case, the racks are located from the angle at a distance of no more than half of the step (this is the distance where you have other racks).

The second option is to blame the bottom of the newspaper tubes. You will need long tubes - scrambled from two or three. There are many ways to be taken, mainly of weaving from the vine. The principle of one - the tubule in one or groups - intertwined with each other, forming the center. Then, using some of the "Lozin", determine the basis by adding the size or giving a more rounded shape if it is necessary.

Round bottom for large products

It will be a bit easier if you cut a slightly laid one to another tubes. In the photo (see below), they took five tubes, twisted them relative to each other. So that the bottom was not so voluminous, it must be accepted. The easiest way to make it a rolling or a bottle - rolling several times. To further work easier, the intersection places are missing PVA glue.

Square Weaves for Square Products

Square Weaves for Square Products

Next, we take the solomin and begin to tie the bottom, passing solomine through three tubes (rope method). So - through three tubes - we make two rows. Then - several rows - after two. Several are that the size of the bottom was almost "as it should" - in shape.


The last two or three rows weave through one tube. During weaving it is necessary to breed the base tube to the same distance. So it is generally, and it turns out, it is simply necessary to ensure that the distance is the same.

We finish weave the bottom and go to the walls

We finish weave the bottom and go to the walls

When switching to weaving walls, the base tubes are intersecting one on the other. So the product is more sustainable and the transition is more reliable. For weaving walls, you can use the working tubes that were used when weaving the bottom.

Simple version of the bottom of the newspaper tubes

Weaving from the bottom of the bottom of the round shape can be started easier. Such a bottom will look not so elegant, but for beginners we advise you to try this method.

For a small product, we take eight long tubes. Four fold the "cross on the cross". They can also be rolled with a rolling pin and connect the connection to smoke - less will be problems at the start.

Next, we take extreme right of the tubes that are located below. We begin it, we get around, the tubes are on top, then below. The second row - immediately weave the rope through one tube.

How to rinse round bottom of newspaper tubes

How to rinse round bottom of newspaper tubes

Next, we work this tube, increasing as needed. When it turns out the bottom of the desired size, go to the walls.

The described variant obtains 15 racks (16-1). If you need more - or add a bottom as weaving, or in the source we take a larger number.

Photo and climbing schemes of different shapes

As experience accumulates, you will want to make products of other forms - oval, rectangular, multifaceted. The section contains several schemes showing how to make form more elegant and complex.

For oval baskets
For oval baskets
With the interlacing chess
With the interlacing chess
With an increase in the number of racks and with duplication of racks
With an increase in the number of racks and with duplication of racks
Options for masters
Options for masters
Different shape, the principle of the same
Different shape, the principle of the same

Weaving from newspaper tubes for walls

As soon as you start weave the product, you will become clear schemes. A little attaching experience, you will learn to look at the photo, restore the method of weaving. For beginners we advise you to start with the most simple patterns. This is a rope, and then - a pigtail. To master them, you will not need a lot of time.

Such a basket of wearing newspaper tubes may even begin

Such a basket of wearing newspaper tubes may even begin


For the development of weaving techniques from newspaper tubes, five to seven racks will be needed. For a start, you can fix on some stand (a piece of dense foam, for example) several thick wire segments.


It's like a weaving looks live on the "simulator"

Next, the process of weaving is:

  1. We take two tubes, put them between two extreme racks crosswise. It turns out one tube lies before work, the other is behind.
  2. Holding to one hand of the tube at the intersection site, the second bending, bypassing the next rack. As a result, that tube which was ahead - it turns out to be behind, the one was behind - it turns out to be ahead.
  3. Rent again, bypassing the next rack and so until the end of the row.

Here, in fact, everything is a way of weaving from newspaper tubes "Rope". Already using this technique you can do the simplest things. The product turns out dense and durable. One important point: so that this pattern is normal, the racks should be an odd amount.

Changes the starting layout of the tube, get another in appearance pattern

Replacing the "starting" layout of the tube, get another in appearance pattern

If you want to complicate a little, you can take two tubes, turn two racks. But then it is necessary to calculate the number of racks so that the second row is with a displacement - then the pattern will be interesting. No less interesting looks like two ropes, directed by one to the other, and not woven in one direction.


Chess - another simple weaving method. To do this, take two tubes, placing them one over the other.

  • The first pair is fixed for one of the racks (just hold the edges with your finger).
  • We bring them forward, watching the remaining one above the other.
  • We start back.
  • Ahead and so on ...
  • We take the second pair, fix them at the next rack (move on one rack forward), but above the first next. Everything is easy - take turns to bypass the racks, then in the back

    Everything is easy - take turns to bypass the racks, then in the back

  • Further actions are similar - forward / backward.
  • In the same principle we are wearing the following rows.

So you can weigh the basket, tray and many other products. By density, the product is not so durable as with the previous weave.

In combination with an already known rope we get an interesting product

In combination with an already known rope we get an interesting product

If you combine the described two methods, it turns out a fairly interesting product. And if the transition also to arrange with different color, it will be more prettier.

Completion of work

In order for the product to look carefully, it is necessary, firstly, remove the working tubes, and secondly, somehow form the edge and do something with racks.

Some weaving elements are more complex. They are better to master after making a couple of simple baskets

Some weaving elements are more complex. They are better to master after making a couple of simple baskets

Fix working tubes

First you need to consolidate the working tubes. Usually they are hiding in weaving - in the nearest binding. For this operation, need a needker or a wooden long skeleton.

  • He retreating down three or four rows, send a skeleton so that it came out near the working tube.
  • Tube bend, sit on the skewer. The entire design gently removes in the place where they stuck a skeleton. Pull the working tube along with a skewer between rows

    Pull the working tube along with a skewer between rows

  • Cut the tube as close as possible to weaving.
  • We repeat from the second.
  • We correct weaving from newspaper tubes so that there are no trimming.

This is a simple and reliable way to secure the working tubes. Their ends are hidden in weaving, while securely fixed, clamped. For those who are just starting to master weaving paper, this is the best, perhaps the option.

Region Weave - Main Reception

Next, you can proceed to the closure of the edge. There are many different ways - more or less complex. The easiest - to do as with the workers, but bend them inside the product. But then the edge is not very beautiful. If there is a desire to make it more aesthetic, you can try the edge of "Rogging". It is not too complicated for the development of newcomers, and the view has an interesting.

To close the edge of Rygoy, you need an auxiliary tube or you can take a skewer, the needle. With its help, bend the first rack to the right, we start it for the next rack and take forward. Similarly, bend right to the right, we bring two more racks for the next and removing ahead. Total hurts bent.

Beginning - bend three racks

Beginning - bend three racks

Next, we will always work with an extreme left tube. We take it, we take right, go around two racks ahead (alone bent, one standing), we bring it over the third, we take forward and bend.

We form the edge of the baskets of paper tubes

We form the edge of the baskets of paper tubes

Floors cut off so that 8-9 mm tube remains behind the counter. In order for this trim to lock, bend the first of the standing racks to the right, pressing the cropped edge. We have three tubes in our work again. Again take the left and repeat everything again.

Click the next counter

Click the next counter

Gradually formed a side, which closes the top of the weaving. We repeat all these steps until three racks remain: two bent and one stands. Track this moment is easy, it is important not to miss. Here it is necessary to be attentive. If you do everything correctly, find a place where the work begins / ends, it will be impossible.

Final chords

When there are three racks unclipped, it is necessary to trace the newspaper tubes to fit in the same sequence and in the same direction so that they put it in the same way as before. We take out the auxiliary tube or a skeleton with which we started to close the edge.

We again take the left tube, in front we enhance the last standing rack and further, as before the algorithm of weaving, we need to start it for the next rack. This rack is already bent and fixed. This is the most that began to close the edge. Tube We turn the back, we apply under the first bent the rack (more convenient with the skewer) and stretch forward, laying the tube as the rest. Cut.

Sake under the first closed rack

Sake under the first closed rack

Further along the algorithm, it must be covered with the previous stand. In this case, this is the last standing. It is bending, we will start the back of weaving and wake up behind the cropped rack.

Press the last standing rack, encouraging next to the already laid and fix it

Press the last standing rack, encouraging next to the already laid and fix it

Now there are no standing racks, there are only three workers. They must be put in the same way as those that are already fixed. We take extreme left left, it is necessary to stretch over the third rack. Look carefully. This is the first rack, near which there is no trimmed tube. Stretch, put, cut.

Stretch under the third rack. If you look around - this is the first, under which there is no trimmed tube

Stretch under the third rack. If you look around - this is the first, under which there is no trimmed tube

Putting the left tube at the top, covering just laid and tube. We start behind, stretch under the resistance, in front of the laid tube.

Here we stretch ...

Here we stretch ...

We repeat the same operations with the next left left. It must be started behind the "empty" rack, near which there is no circumcision tubule. This rack is rightly the right of which we just worked. Here, without sinking, you can not do - you need to slip the newspaper tube for two already laid (see photos).

Correctly find the place

Correctly find the place

Put the tube on top, hiding cut above. We start at the back, sit on the skewer and stretch out. Holding the fingers, step up from the side to the side to have a place for her and she "lay down." Cut.

We also need to go correctly - repeating the same scheme as before

We also need to go correctly - repeating the same scheme as before

It remained the protruding newspaper tube. She will bring it for the third counter of the rack. It is easy to navigate: under the first two already sticking trimming just laid. Spawdow is descended under laid turns, we take it near the curved rack.

It remains only to trim

It remains only to trim

With the help of a shrinkage, we bring the last rack outward, lay out so that it lay down the same as others. Now it can be trimmed. The edge of the basket is ready and find where it starts and where the number ends it is impossible.

Photoidei for weaving from the tubes

Beginner masters are assigned weaving from newspaper tubes on simple crafts. With the acquisition of experience, I want to diversify the products, use more complex patterns. In some cases, an interesting weaving appearance is optionally complicated. Such an example in the next photo gallery. It collected step-by-step photos of creating chess weaving.

Here is such a basket or braided tray can be made from newspaper tubes.
Here is such a basket or braided tray can be made from newspaper tubes.
Beginning - wept two racks
Beginning - wept two racks
Watch the racks not bent and not shifted
Watch the racks not bent and not shifted
Number of turns - at your discretion
Number of turns - at your discretion
More convenient if the tube will "look" to the right
More convenient if the tube will "look" to the right
Fix the second working tube, make a second column
Fix the second working tube, make a second column
You can move in the opposite direction
You can move in the opposite direction
Principle the same
Principle the same
So that the racks do not move, they are better to fasten clothespins to the form
So that the racks do not move, they are better to fasten clothespins to the form
We begin the second row
We begin the second row
No different from the first row
No different from the first row
We finish the second series of chess weaving, cut off the extra working tubes and fix them
Finish the second series of chess weaving, cut off the extra work tubes and fix their ends
We leave so many working tubes as you need
We leave so many working tubes as you need

As you can see, weaving is simple, but it looks like this product is interesting. There are still other techniques. If you look at the photos, there is a chance that you yourself can repeat or do something similar.

Simple basket. This is a great option to master weaving from newspaper tubes.

Simple basket. This is a great option to master weaving from newspaper tubes.

One of the options for completing work

One of the options for completing work

Several ways of racks

Several ways of racks

The use of a variety of patterns, makes the same basket in unrecognizable

The use of a variety of patterns, makes the same basket in unrecognizable

But you can't tell what it is made of paper

But you can't tell what it is made of paper

From the newspapers you can weigh a basket for a cat. In such a layer, she will be comfortable

From the newspapers you can weigh a basket for a cat. In such a layer, she will be comfortable

Openwork weaving from the tubes - it is important to withstand equal distances

Openwork weaving from the tubes - it is important to withstand equal distances

Basket for linen

Basket for linen

As decoration, you can use and pebbles / beads

As decoration, you can use and pebbles / beads

The part is wetted by the usual rope, part - with the help of layered weaving

The part is wetted by the usual rope, part - with the help of layered weaving

Series of identical baskets made of paper tubes - functionally and beautiful

Series of identical baskets made of paper tubes - functionally and beautiful

Surprisingly, but the fact is even furniture from the newspaper tubes! And not only puppet, but the most real!

If you are a lover of needlework, then you definitely should weave baskets from newspaper tubes. This is a very interesting technology that may be fascinating to take not one evening. Below you will find all the necessary instructions for weaving baskets from newspaper tubes for beginners.


To begin with, prepare the necessary toolkit for weaving baskets of paper. You will need:

  1. Newspaper or coffee stitch or even advertising flyers.
  2. Good scissors and paper knife.
  3. PVA. Please note that the cooled paper (this is used for printing logs and leaflets) is poorly bonding. Here will help the "moment of crystal" and similar adhesives.
  4. A set of tassels.
  5. Water veil. Oil and alkyd will not fit!
  6. Dense cardboard to make the bottom. Best is suitable.
  7. Scotch.
  8. Any clamps.
  9. No capacity to dissolve paint.
  10. Line.
  11. Soft pencil.

These materials are enough to make any braided basket of newspaper tubes. And when you all prepared, you can proceed.

How to make the tube step by step

First you need to wind a bunch of flavored flags from the newspaper. The moment is responsible and needs to be followed. All tubes must be approximately the same in order not to be knocked out.

To turn the tubes, use the following instructions:

  1. To start, make a lot of strips with an 8x30 centimeters.
  2. Put the strip vertically and twist diagonally with a cocktail tube or knitting needles. When you get to the end, the corner is glued.
  3. The basis must be pulled out and leave the tube to dry about 25 minutes. The usual PVA during this time completely dries and the tubes will not be unwound. So that they do not turn around during drying, it is better to fix them with the help of clamping. Scotch is better not to use - it will not be possible to tear off.

To make a box of newspaper tubes easier, take one end a little more than the other.

Master class on weaving

So, the tubes are screwed up, the tools are prepared. Now you can proceed to weaving. Below are the main varieties of baskets from newspaper tubes, easily repeated with their own hands.


This will use so-called here. Rope weaving baskets from newspaper tubes. The method is simple, but very spectacular. To do this, follow the instructions:

  • Take 6 tubes and fold with each other. So that they do not disintegrate, use the clothespin to get a whole working area.
  • Repeat 1 point to get a cross. This will be the basis for a basket of newspaper tubes.
  • Now the foundation needs to be passed in half, and the ends put in place of crossing the cross.
  • After you need to weave the bottom. Trubno need to be bend after each turn forming a straight angle. It turns out a ring that needs to be repeated 4 times.
  • The sidewalls must be placed by pars. Longitudinal vines must be put under the bottom. Ends of paired tubes fasten on the lukshka.

It turned out a simple basket of paper. For a beginner is the best start, as the instruction is simple.

Oval basket

Oval basket made of newspaper tubes, she woves with their own hands much more difficult. There will already need perseverance and control.

So, proceed to work:

  1. For a start, the bottom is created. This is used here. Simple weaving, that is, the tube is carried out under and then above the tube.
  2. To secure them, perform the strapping, as in the photo.
  3. When you get to the required diameter, the edges of the tubes must be cut upward.
  4. Now fix them with ripples and continue weaving on the same type.
  5. Finish weaving can be ordinary garter.

It turned out a simple oval basket of fruits or cookies.

Square basket

The rigging of the square basket is considered the most difficult. Here you will need a tough base from cardboard. If you make it big, it turns out a chic laundry basket from newspaper tubes, in which the clothes will not be alleged.

Here is the master class on weaving baskets of paper:

  1. First you need to form the bottom. Take the cardboard strip and bend in half. And it needs to pierce the holes with an interval of 2 centimeters. They need to insert the main tube.
  2. Long tube inlet next to the cardboard. Get to the edge and make a turn. Next must be placed in the opposite direction. To prolong the working tube, just doct.
  3. Now it's time to form the sidewalls. The flasher from the newspaper overgrow in half and the grove is both tip in the bottom. Tails, seemed under the bottom, bend up and secure.
  4. To fix the sides, in the center there are any object of a similar form. After connect the frame tubes with rubber band.
  5. Start weave with the bottom. To do this, the long tube is in the side, alternating with vertical flavors.

How to make a handle

The handle for the basket of newspaper tubes needs to be done if you are going to transfer it. For example, if it is designed for a picnic. The handle for the basket of them is done like this:

  1. Take 4 tubes and splash with a spray with a spray. It is necessary to increase elasticity.
  2. Clamps mark the place where the handle will be tested.
  3. Grind the tubes through the ranks so that they are the same length.
  4. When 2 rows are obtained from 4 flagellas, you need to cross them. According to the result, it turns out a smooth braid.
  5. Continue to make a spiral until it becomes the necessary length.

Decor of the finished basket

About how do you make a basket from newspaper tubes you already know. Why not try to decorate it? This case has several ways.


Any paint resistant to moisture is suitable. For example, you can take acrylic, which will be a win-win option. If you use a coated paper, it will be able to go to it normally only acrylic - the gouache and watercolor are not suitable.

You can not hold yourself. Want a monophonic basket - without problems, but you can apply entire drawings or make a mosaic.

Satin ribbons

Before weave, it is better to think about the design in advance. A satin ribbon can make a border or allocate the bottom - act at your discretion.


Macaronami decoration is very common in the West, and in Russia is almost not used. They can be painted from the spray and stick to the frame. It turns out an interesting design that you can do with children.

Master class round basket without handle

Last but you can consider how to weave a round basket without a handle. In fact, it is a cup that can be folded fruit or sweets.

So, proceed:

  • For the Punchka, fold 4 pair tubes to get a cross. The working tube must be folded in half.

  • Now start the cross the cross using the standard rope range.

  • On the 4 mug you need to dilute the steam racks and the plenty of further. Try not to form lumets.

  • Between racks it is necessary to gradually increase the distance. It should be 2 centimeters more.
  • After an acute item, you need to make a hole and insert another rack. Fix it better for polymer adhesives, like a "dragon".

  • Now take a form (for example, a deep plate) and fix it like this.

  • After you need to make a strapping. Take 2 tubes of another color and tide the counter.
  • Now you pass it out, as shown in the photo.

  • Take the left tube and count 3 racks, start for the 4th.
  • How to finish weaving from newspaper tubes? Take the right tube and count 3 ragows, start for the 4th. It remains only to fix it inside. Continue weaving according to this scheme

Photo ideas of baskets made of newspaper tubes

If you want to rinse the basket in an unusual format - read the photos below. There are original work of masters-needlewomen, which can be taken as a basis.

Useful videos on the topic

Basket made of newspaper tubes: options, weaving technique, master class for beginners

  • July 29, 2019
  • Crafts
  • Natalia Penchenskaya

The basket is the thing needed in the household. It is convenient to store small items, fruits and vegetables, cosmetic accessories or threads and yarn for knitting. There are large and small, round, oval or rectangular baskets. The easiest way to go and buy a wicker container on the market, but the cost of a beautiful product is a considerable product, and the crafts from the vine are quite heavy.

Much more interesting to make an independent basket of newspaper tubes. If there is a large number of old newspapers to weave it easier than simple. How to fold the details of the crafts with their own hands and which there are weaving methods, we will look further in the article. Beginner masters, our master class will help to cope with the fulfillment of a simple product of any shape on a cardboard base and with a wicker bottom. You will learn how step by step to act when weaving the sidewall, how to make the edge bending. Also explain how to twist a durable handle for carrying the product.

You can leave the finished basket from newspaper tubes unchanged or paint with paints and covered with varnish. The paper treated in this way will be durable and waterproof. Some masters cover the tubes first by the verse, giving them the natural colors of the natural vine. After coating the surface with glossy varnish, no one distinguishes the paper basket from the product from the vine. And in appearance, and for the quality of the crafts will be completely similar.

Before you start weave a basket from newspaper tubes with your own hands, you need to prepare a large amount of thin and long details. How to quickly twist them, consider in more detail the article.

How to twist a newspaper tube

Recently, there are many master classes on the manufacture of various crafts from newspaper tubes on the Internet pages. However, so far many people do not know about their existence. If you feel about this number, then this section is designed for you.

Old newspapers need to cut off strips width 10-12 cm. Starting from a rectangle corner, paper twisted with fingers, tightly pressing the turns so that the tube is thin and long.

Many masters advise to use a knitting needle for convenience, but some given facilitating method do not like, since the tubes are slightly cones, that is, the product diameter increases to the end of the winding. For weaving, the tube must be smooth and thin. Try so that all the details are one diameter, otherwise the basket of newspaper tubes will look untidy.

how to strengthen the handle on the basket

The photo shows above, as the master hands turns out a thin tube from paper. If the first time it is not possible to make it neatly, do not worry, with experience, catch up to twist the blanks for weaving in 1 minute. At the end of the extreme corner of the paper, smear the PVA glue and attach to the last turn. Rights of length and edges are poured with scissors at the end when many elements have been done.

Weaving baskets From newspaper tubes requires details of a long length, so immediately try to make the glue of two blanks into one. The edge of the first element lubricate the glue and screw into the second hole from the end side. After frozen, the weaving can be safely continued. In this way, you can weigh a basket into human growth, because it is possible to lengthen the tubes many times.

Cardboard basis

Beginners A basket made of newspaper tubes is more convenient to draw up on a cardboard basis. In order for the bottom of the crafts to be durable, mainly use packaging corrugated cardboard in one or two layers. Distribute the desired geometric shape on the sheet and cut the detail with scissors. Having retreated 1 cm from the edge of the cardboard, make a sewing hole at equal intervals. In our sample, this is 2 cm. Then insert the newspaper tube to each hole and bend it in half, sending up.

картонное основание

The first row of weaving starts with the angle of the future basket, if it is square or rectangular. On the extreme newspaper tube, stretch from above, bent in half the part and tighten it with the letter "x" alternately around the perimeter of the bottom, bypassing every thing sticking up the part. All the time change the position of the halves: one in front, the other is rear of the canvas. The next step is made on the contrary. When the paper ends, attach to two ends even on the tube using PVA glue and continue to work until the desired basket height. This is the easiest option of weaving, with whom the masters will cope with the first time for the first time.

Running Round Pedley

Next, consider how to make a basket from newspaper tubes with a wicker round bottom. On the step-by-step photograph below it is clearly visible, the order of laying the tubes on the surface of the table before starting work.

First, put the three elements near the vertically and horizontally sign "+", then put a similar number of details with the letter "X". So that the newspaper tubes do not slip and not slipped during further work, the preparation of the workpiece is a bit. You can use an iron or a conventional rolling pin.

Как начинать плетение

Weaving is performed in a circle. Sing one tube in half and put three tubes on a pack on a pack. Press the place of bending with your fingers. Further, the basket from the newspaper tubes weave in pairs, that is, the top three elements are visually divided into pairs and bypass their halves of the main part described above. When a little material remains, make a hitch: to each end of the tubes, take another one and continue weaving to the desired diameter. You can make a cardboard pattern or measure the bottom of the usual package of glass.

One more option round bottom

Circular weaving baskets from newspaper tubes can be performed by large stitches. The start of work fully corresponds to the previous version already described above. The main tube is highlighted in photography with white. It is bend, as usual, in half and crossed around the packs of three details, not separating them in pairs. To continue working on a round basket from newspaper tubes upon reaching the desired diameter, lift all the elements perpendicular to the table surface.

как сделать круглое донышко

There are baskets in the shape of a truncated cone, that is, having an extension upstairs, then you will need to insert the pattern into the workpiece. It is most convenient to do from a familiar to the reader of corrugated packaging cardboard. In order for the tops of the parts not bent under the weight of the paper, they are attached to the pattern with linen clothespins. And the main newspaper tube, which is carried out by weaving itself, continue to twist around each vertically sticking needles. For convenience, you can temporarily remove the clothespin, stretch the tube and attach the clothespin to the previous place.

Square base

The bottom of the baskets from newspaper tubes can be not only round, but also with straight corners in four sides. Both square and the rectangle woves as follows. On the surface of the table, they are laid out in a row of tubes at an equal distance from each other horizontally and vertically. For the correctness of their location of bed under the workpiece drawing on the sheet of Watman. It draws several squares with increasing size with one central point.

To make newspaper tubes do not move, secure their ends of clothespins. Last but you need to define the middle of the square. For this, two details are laying out in accordance with the drawing on the diagonals and also strengthen the clothespins.

квадратное плетение дна

For weaving, the bulk from the newspaper tubes is the main part fold in half and put on a bend to the angle of the square, that is, on the diagonal element. Then make ordinary weaving with a change in the position of the tube forward-back. Each row is tightly moved to the previous one. Rodyshko is obtained very dense and strong. Such a basket will withstand a big cargo. When the desired size on the square is reached, all tubes are bend perpendicularly, and the sideways begged to the desired height begins.

Oval bottom baskets

A basket from newspaper tubes with their own hands is easy to soar and oval shape. The principle of assembly Punchka DIY is perfectly visible in the photo below. The tubes are laid out on the surface of the table perpendicular to each other. From above to lay 7 pieces, enhance the extreme parts of pairs. The horizontal exhibit 9 pieces, separating them to three beams of 3 elements aimed at different directions. Weaving, as usual, is conducted by a working tube, bent in half. But for oval shape, the bottom of the basket is not alone, but two working items. Work begins with putting on bend on 9 side tubes and with one, and on the other hand. So that they keep tightly, the main part is wrapped in the letter "x". The vertical elements are used further, and the lateral side is soaked already with the division of the nine on the bundles of three pieces.

овальное основание

The same procedure is carried out with another tube. Since all weaving is running clockwise, they put it down from top to bottom, and work is carried out in the opposite direction.

Then there is a simple extension of the magnitude of the pancake basket. Weaving is performed with intersecting the main element around each part on its path. If necessary, the tube is increasing in length using PVA glue. So continues until the required size of the basket is reached. All items bend up and attach clothespins on a cardboard pattern.

The height of the product, that is, all the sides can be placed in different ways. For beginners it is easier to continue the work of the same change of the position of two halves of the main tubule. For experienced masters, there are a lot of beautiful schemes for their interlacing.

Original decision for beginners

But since our article is designed for beginners training of specialists, we will consider in more detail how to weave a basket from newspaper tubes in a simple way, but as a result, get the original product.

плетение корзинки

Before starting work, all paper tubes are painted in different shades of brown with a simulator. After drying, it is starting to work first with darker details, raising the height of the basket for 3-4 rows. Further, light elements and a simple weaving are enveloped by vertical tubes once. In order not to be confused with a circular weaving in the number of rows made, one of the details put a contrast color tag. In our sample, the blue tape is wound from above. Now the master perfectly sees the beginning and end of each row and not mistaken when weaving.

Then the most interesting begins. As you know, weaving is carried out by a tube, bent in half, that is, two details. To create an original drawing, one of the halves is lengthened by a light, beige element, and the other - dark, brown. Despite the simplest weaving, the product drawing is in interesting. A novice master who only masters a new weaving technique for him, will be able to diversify crafts with painting parts in different colors, using not only the simulators of different shades, but also brighter paints.

Bending edge

You now know how to start work and raise the height of the product in a simple way of cross weaving. But it is very important to know how to finish a basket from newspaper tubes, correctly process the edge so that it looks neat. The edge bending also has several embodiments. For beginners, we explain the easiest way. The tubes sticking up alternately bend into the side and intertwined each other throughout the perimeter of the crafts.

загибка верхнего ряда

The remaining ends are cut off with scissors, while maintaining only 4-5 cm of their length for further work. These parts with wooden spanks or knitting needles are neatly populated between weaving from below, hiding them inside. Fasten the ends with the help of plow liner or adhesive gun. If the basket does not need ideas in the handles, then the work can be considered over. We'll figure it on, as fasten with a reliable handle with a wicker basket.

Basket handle from newspaper tubes

Convenient wicker product to carry when the handle is made. On square or rectangular crafts, you can simply leave the hole, skipping several rows on the sides. Who knows how to knit threads, perfectly knows that to produce a hole, the knitting in the right place turns over to the wrong side and is conducted in the opposite direction. The same thing happens when weaving with newspaper tubes: the place of the future handle on the basket canvas and turn it in the opposite side, lifting several rows up. Further by the type of "air" loops in knitting weave the free row of the length of the handle, connecting it with the cloth on the other side of the basket. The same procedure is performed for the second handle.

как укрепить ручку на корзинке

In a circular or oval product, only one long handle is usually drawn up as in the photo above. To do this, move the places of its attachment and impose between the side of the side of the sides of the crafts a long detail, bent it in half. But it will turn out a sloping handle, so it must be sealing. To do this, a separate tube is dried alternately around the first and second arc along the entire length. The ends of the paper are hiding inside the canvas with the help of the needles, like when the bending. The whole design is fastened with PVA and adhesive gun.

You can make a handle with a simple twisting of the beam of the tube. Masters advise to get into it all the elements of the foam sponge, moistened in the water. After drying paper, the twist will turn out incredibly strong. It is also interesting for a woven moppy handle, and with this type of weaving, everyone since childhood is familiar.

Decoration of crafts

Now you know how to evan the simple basket of newspaper tubes. The master class given in the article is designed to train newbies. So that the aircraft had a finished look, it must be painted. To do this, it is best to use acrylic paints and a soft natural brush. After drying, the product additionally can be coated with acrylic varnish.

Some masters use conventional white sheets without printed paint. They can be covered with one or more layers of veil, giving paper the desired shade. In order for the basket to be exactly similar to the product from the vine, apply two layers of acrylic glossy varnish. After drying, the basket will beautifully glisten and gain strength. It can be washed under water, wipe with a wet rag, that is, to use as an ordinary wicker basket from the market.

In the article we tried to describe in detail all the tricks and secrets of weaving from paper tubes. Now you know how to twist them from old newspaper sheets, how to make a bottom and raise the height of weaving, you can independently make the right bending of the upper edge and attach the handle. As you can see, weaving from newspaper tubes is an interesting, creative and absolutely simple.

Be sure to try to make a crawl with your own hands! Creative success!

Weaving from newspaper tubes

All about baskets from newspaper tubes

All about baskets from newspaper tubes

Baskets made of newspaper tubes are easy to weigh themselves, using various ways to connect their connections and detailed step-by-step instructions. This decor element can easily replace traditional rattan products or vines. Master class on weaving baskets from newspapers for beginners will help make the first product, will make it possible to understand the workpiece of raw materials and other important aspects of this classes.

Advantages and disadvantages

Weaving products from newspaper tubes - a fairly exciting occupation. It is easily mastered even newcomers. We note the obvious advantages of this classes.

  1. Easy performance. You can create your first product in a few days.
  2. Availability of materials. No need to harvest the vine, wait until it is diverted and crushed. Paper tubes can be made of girlfriend at any time.
  3. Ecology . Even used adhesives do not harm the environment. For the base, the natural, recyclable raw materials is also used.
  4. The possibility of earning. Having mastered simple weaving techniques, you can go to difficult, start creating products to order, for sale.
  5. Exterior appeal. Baskets made of paper vine are obtained elegant and neat. Changing the diameter of the elements used, the selection of the pattern of weaving, one can give them the original appearance.

Disadvantages are also there. Formation of newspaper tubes - the case is quite time consuming . Even a small product requires from 50 to 60 pieces. In addition, the materials themselves are money, they are not so cheap, as it seems. Use paper products should not be in a wet environment, even under the coating they can deform.

Such baskets are more fragile than their vine analogs.

Review of species

All baskets made from light newspaper or paper tubes can be classified by several features. The main division is made on the further use of the product, the technique of its weaving. It is these factors that affect the fact that the finished basket will be - decorating the interior or utilitarian, large-format or miniature.

According to the method of weaving

Various methods of weaving baskets often combine elements of other types of needlework. Many techniques are taken from working with Loza, Macrame. Among the most popular you can select several techniques.

  • Spiral twisting. Provides a gradual increase in the height of the product using a junction of twists in a circle. On each other, the tubes are superimposed on the helix. The method is suitable for creating decorative high heights, a complex elongated form.
  • Layers . In this case, the basket woves immediately from several elements in 1 grasp. The first rows of the product are formed using the traditional technique. Then additional tubes are placed in the supports, continuing to swell the vertically located walls to the very top. This is a good solution for creating patterned products.
  • Spiral weaving. In this case, the tubes are superimposed at an angle. This method is used in the manufacture of miniature items of a small diameter - glasses, vases.
  • Openwork or lace. The technique involves connecting the tubes into patterns of different complexity. Most often, the technique is used to create boxes, gift wrapping.
  • Kosichka . It happens 2 types - overhead and edge. Weaving by a pigtail allows you to achieve the maximum similarity of the product with analogs of wood vine.
  • Rope . The most common technique designed for people with minimal weaving experience.

These are the main techniques used when working with newspaper tubes when weaving baskets.

By destination

Here division can be called relatively conditional. Rounded and oval openwork baskets with a high handle are considered Easter. For toys or storage of linen make high boxes, expanding up. For picnic - options for rectangular shape with a lid.

For mushrooms, traditional baskets are made with a handle.

And you can also weave the tubes box for jewelry or porridge for flowers, make a vase for dry plants.


In order to make braided baskets from newspapers, you first need to collect the necessary material. For the production of fixed raw materials - tubes - not only the stock of newspapers will be useful. We will have to be stockpur with a pencil or PVA in a liquid form, a knitted long needle, scissors. Newspapers can be easily replaced by any other paper - office, for fax, log pages or booklets.

Creating tubular blanks is made according to a specific scheme.

  1. Sheets are cut into strips with a width of 4-6 cm. The more dense paper, they will already be.
  2. The first strip is superimposed. The length of the tube is determined by the sharp corner of the connection - than it is less, the more this indicator will be. The adhesive connection is not required here. If you do everything correctly, the tube will not be promoted after removal from the base.
  3. Newspaper or paper are wrapped around the knitting needles . Hounds as close as possible on the spiral from the base to the edge. During the tube test, the free end of the material is held.
  4. End - the triangular edge of the newspaper - lubricated with glue . After that, the tube is covered to the end.
  5. Ready product neatly Removed from the knitting needles.

The amount of blanks is determined by the size and complexity of the product. The workpiece has to spend a lot of time on the workpiece, but the result is worth it. Before use you need to wait until the glue is dry.

Detailed master class for beginners

The main technique of weaving newspaper tubes - Rope . With its help, you can step by step to make simple products in the form of a circle or square. On a product, about 14 cm with a diameter are bought from 40 to 50 individual tubes, it is better to have a margin in case of marriage.

We give the procedure for performing work.

  1. Basics formation . Eight tubes are developing cruciform, 4 pieces horizontally and vertical. Washes glue. It will give the bottom great strength.
  2. Bottling bottom. The first tube is twice the loop, it is put on top of 4 base elements. The rope technique is used further. The front elements are discharged back, and those that were from the back side are on the front. Actions repeat, if necessary, performing extension with the placement of the continuation into the hole of the previous tube.
  3. From the 3rd row, the bottom weaving is conducted not through 4, but through 2 tubes . From the 5th - after 1, already up to the desired diameter. As soon as the desired size is obtained, the remaining billets are coated inward, the excess length is trimmed. The bottom is messed with glue, fastened with clothespins in places of completion of weaving, dries.
  4. Wall lifting . Inserted tubes sent vertically to the curved guides. They also wrap loop, weaving begins in the ranks until the desired height in the same rope technique. To maintain a form at the bottom at the time of operation, a glass bank of the desired diameter is put. Upon completion of the weaving, the ends of the tubes bend inside, the excess is cut, everything is fixed with glue.
  5. Formation of the handle. For her, in the sidewalls, the basket is left in 3 vertical stand-tubes. Weaving is conducted in the rope technique immediately from 2 sides to the center. At the top point, the tube is connected using adhesive tape, masked for the basis.
  6. Finish . If the material has been used in advance, it is necessary to apply on the completion of weaving. The decor is made from acrylic paint, glue and water, they are applied with a brush or sprayer - first on the outer walls, then from the bottom. After drying, you can apply lacquer, decorate the product with ornaments, ribbons, appliqués, arrange a decoupage in the technique.

Detailed instructions will help everyone to master not only the bottom of the bottom or handle, but also gives to finish the edge beautifully and neatly.

And it is also possible to use it in the manufacture of baskets with a lid. For them, the box itself is left without a handle, and for the additional part, the openwork or chess weaving technique is chosen. However, the rope method is suitable.

In this case, step-by-step execution technique will include several actions.

  1. Connect glue 2 of the cardboard circle of the corresponding diameter. Put in a circle, rays, newspaper tubes.
  2. Start weaving, inserting 4 pntures of the base. They are placed through 1 beam. Conducted on top of the tube, then under the next one. It is necessary to achieve the formation of a beautiful wicker border on the contour of the cardboard circle.
  3. Shape flights . They do, applying the blank of the cover to the basket. The tubes are bent directly, then the weaving continues in the new plane. Enough 1-2 cm width to get a kaym. Upon completion of weaving, the ends are sweeping inside, cut and fix.

Given these recommendations, you can easily make a beautiful cover for a rounded basket of the appropriate diameter. Decoration is made at will. Consignment the result can be transparent or toned acrylic varnish.

How to weigh different baskets?

Weaving decorative or functional baskets made of paper and newspaper tubes today is performed not only in traditional rope technique, but also using other techniques. They are easily combined with different forms and diagrams, allow stages to form products with covers and handles.

Simple little baskets can be called rapidly crafts - they are suitable for storing knitting accessories, sweets, other trifles. Large twisted products with a complex pattern are beautiful, original - can be used in more utilitarian purposes. The choice of shape and size is the taste of the owner itself, but the order of weaving baskets from the newspaper is better to observe strictly.

The use of various techniques in practice should be considered in more detail.

Especially since these masterpieces are easily created with their help.

For linen

The main complexity in the manufacture of large-format products is the large volumes of the materials of the materials. This takes a significant part of the time. For the frame you will need a dense cardboard, wallpapers for the salary. The tubes are pre-stained, it is also worth picking up the template - the product on which the laundry basket will be formed.

We will analyze the procedure.

  1. Future cuts out of cardboard bottom .
  2. It is flooded selected Wallpaper or textiles.
  3. On the perimeter, holes are done on the diameter of the tubes with the same step. The material is inserted into the bottom, from the reverse side bends, glued, covered with the second layer of cardboard. Design for drying time is pinned with clothespins.
  4. Wall woven. The tubes located vertically intertwined in layers, several pieces, bend and pull out in the same direction. It is better to install a box or bucket inward depending on the shape of the finished product. The tubes when weaving are breeding for the base, then output before it, achieving a compound resembling a sensitive cloth.

Upon completion of the foundation, you can make a handle. For this, lifting rods are formed on the sides, and then fastened with adhesive composition, hide inside. If unpainted tubes are used, they are covered outside acrylic paint, varnish.

For fruit

The simplest and miniature articles from newspaper tubes are created for the kitchen. Here, paper fruit is easily replaced with a metal or wooden. The bottom is easiest to weave the rope technique, but the board make more openwork. The tubes are better to pre-paint the mixture of the coller, 2 tbsp. l. Acrylic varnish and 0.5 liters of water. It will take 310 blanks of 270 mm long.

This is what will be the order of weaving.

  1. Shape a cross Of the 12 tubes, groups of 3 pieces each.
  2. Sevel 6 rows . Then go to whipping each twist. Continue work to the desired diameter.
  3. Place in each previously done hole for 3 additional tubes . Continue weaving with lifting for the formation of sides, placing the round item inward for a clearer contour. Use a layered weaving method, capturing 2-4 bar. In the center, create a diamond pattern, simply connecting the tube cruciform. Then increase new elements, continue to work.

The fruitman can be left without a handle. If it is necessary, you can increase it, as in the master class for the rope technique.


This technique is considered the most difficult, but interesting. It is better to immediately take the tubes of two different shades - bright for the pattern, traditional for the base. The bottom is fluttered in the usual rope technique to the desired diameter. Then the tubes are sweeping up, the template is inserted into the case for a clearer shape withstanding. We list the subsequent steps of the master class.

  1. Weaving in the technique of direct and reverse tanks for 2 rows. The first tube comes over the rack, the 2nd is carried out in front of it.
  2. Third and 4th row Form with the introduction of a new shade.
  3. Picture is formed . The painted tube bends down the spiral in the oval, is inserted between vertical racks so that the adjacent elements formed the heart. Each decorative detail is glued to the racks.
  4. Basis color tubes are entered . Basket woves to the desired height.

It will remain fasten the ends of the product at the top of the glue, bending them inside. Then you can apply acrylic varnish, securing the result.


This option involves the use of a base from cardboard for the bottom. The sheet is twice as well, the holes are done by holes in its board in the place of bending, retreating 2 cm. The number must correspond to the number of twisters used, they are fed. The technique resembles work with straw, so the pipes themselves are better to flatten. Then the sticks are connected, the bottom-up first until the desired size is fixed.

The boards form, inserting new twists in the hole around the perimeter of the square. They are flex, fixing on already existing tubes. Fix with glue or clothespins and adhesive tape. Then weave the walls to the top.


It is somewhat different from the round by execution. Cross here is made with double transverse twists and single longitudinal. So the first 2 rows of the bottom are soaked, the remaining 9 are formed sequentially, through 1 tube. The then added twists in the number of future vertical racks, the work continues until the desired diameter is reached.

An oval pattern of cardboard or plywood is inserted into the bottom, the walls vertically accumulated on it.


Weave is performed by analogy with a square, a cardboard box is taken to create a form.


This pattern looks very decorative. It can be formed using a rope weaving with alternating colors or layering, with skipping. The bottom is made by analogy with a simple square or rectangle. Then the side of 5-10 rows are formed. After that, chess weaving is performed using 1 tube for 2 supports, with alternating skipping.

Chess pattern can be formed from several colors . But even in a monophonic design, it looks very decorative.

How to paint?

Staining the tubes is better to perform before . To do this, it is necessary to immerse them into the container of a small depth, and then pour the selected dye, the aqueous veil under the tree is suitable, for 3-5 minutes. Dry products on grille or grid. Distribute paint will evenly help the brush. Ready baskets are easier to tint with a spray gun.

You can get a blue tint using a conventional blue, dissolved in a water-alcohol basis. The kel can be varied individually. When using wood veil, matching colors will be like this:

  • maple - red-orange;
  • oak - brown-red;
  • ebony gives a dark gray tone;
  • larch - Yellow;
  • fern - green;
  • Mahagon - Pink.

When using the morone, it is easiest to paint the blanks, dipped them directly into the container with the composition, from each end. So the products will be painted from the inside. Paper has time to be impregnated with a kel, but does not twice.

Newspaper tubes are better not to toned before. With primary staining, they still retain the remnants of typographic paint visible. When re-acquire a fragment. It is possible to solve the problem, causing a molded in the right tones of the varnish after weaving, in 2-3 layers.

Useful advice

When weaving baskets made of tubes, it is important to comply with some rules. Useful recommendations will help novice masters avoid common mistakes. Usually the greatest complexity causes the manufacture of the tubes themselves. But the rules here is not so much. You can wear out paper strips on a skewer or a suit for a suitable length, the thickness of the tube depends on their diameter.

You can produce rotation in any direction - on yourself or on yourself. Typically, the leading hand when working is the right, the left only adheres to the edge of the paper. The needle can also be applied from above or from below, depending on the personal preferences of the wizard.

In the manufacture of products to order, it is better to take clean writing or consumer paper.

Weaving is better to produce a little wet tubes . Billets Store in a package or file so that 1 end shaking - it will be harder than the second, facilitates buildup. Mixed blanks in the process of operation will help the pulverizer with water, into which a small amount of hair balm has been added.

Easy turning the product in the process will help the usual gym. It is flat, easily placed on the table or other working surface. Rotating it, you can noticeably speed up the process of weaving.

On the secrets of weaving from newspaper tubes for beginners, see the next video.

Добавить комментарий